Loading ...
Loading ...
Loading ...
(219,1)
[ Edit: 2020/ 8/ 19 Model: T32-A ]
Deactivation of Intelligent Park Assist:
GUID-572411AA-8577-490B-88E5-8F4E0E52D4D5
The Intelligent Park Assist will deactivate under
the following conditions.
. When the steering wheel is operated manu-
ally.
. When the shift lever is placed in the “P”
(Park) position (CVT/DCT model).
. When 5 seconds have passed since the shift
lever was placed and kept in the “N”
(Neutral) position.
. When reverse operations are conducted
more than 15 times for steering corrections.
. When the system judges that the condi-
tions (such as worn out or low pressure
tires, road conditions, etc.) are not suitable
for correct course predictions.
. When the vehicle backs up to a position
behind the place from which the Intelligent
Park Assist operation started.
. When the vehicle passes the reverse start-
ing position by over 2 m (7 ft).
. When the vehicle speed exceeds approxi-
mately 7 km/h (4 MPH).
. When the parking operation by the driver
deviates from the Intelligent Park Assist
guidance to some extent.
Safety notes
GUID-6D40BBA6-4FA2-4E40-BEAB-A406F1C43A17
WARNING:
. Do not drive looking only at the screen. It
could cause unexpected accidents or
cause the vehicle to contact surrounding
objects.
. When assistance from the Intelligent Park
Assist is no longer necessary, turn off the
Intelligent Park Assist by touching the
Cancel key on the screen. If the Intelligent
Park Assist remains on, the steering
wheel may operate automatically and
may cause unexpected accidents.
. Make sure that there is enough space for
parking maneuvers before starting to use
the Intelligent Park Assist.
. Keep in mind that the front of the vehicle
may swing out towards oncoming traffic
while the Intelligent Park Assist functions.
CAUTION:
Do not use the Intelligent Park Assist under
the following conditions.
. On unpaved roads.
. On slippery roads such as snow-covered
or frozen roads.
. On uneven roads with slants, bumps,
curbstones, wheel tracks, etc.
. On curved roads.
. At mechanical parking facilities.
. Where parking or stopping is prohibited.
. When tire chains or a spare tire are
installed.
. When the vehicle is being towed.
. When the doors (including the back door)
are not closed.
. When transporting a load that protrudes
from your vehicle.
. When the vehicle is laden with heavy
loads.
NOTE:
. Under the conditions listed below, there
may be instances in which surrounding
objects or vehicles cut into the vehicle
pathway, or when the vehicle cannot be
parked in the correct spot following the
Intelligent Park Assist operation, etc.
— When the shift lever is operated while
driving.
— When sudden start, sudden stop or
sudden operation of the shift lever
occurs.
— When the tire pressure is too low or the
tire is worn out.
— When tires are installed that are of a
different size from the ones that were
equipped at the time of factory ship-
ment.
. When using the parallel parking mode, it
is not always possible for the system to
find an appropriate parking space and
may indicate parking spaces that are not
suitable for parking. Following are exam-
ple conditions for which the system may
not find a parking space correctly.
— Parking spaces with objects located
above the height range of parking
sensors (sonar) (i.e., overhanging
loads, tail sections or loading ramps
of goods vehicles).
— Parking spaces that are partially occu-
pied by trailer drawbars.
— Parking spaces that are littered or
overgrown.
— Parking spaces where a curb exists
(causing damage of the wheels and
tires).
— Parking spaces that are blocked by
foliage, grass, paving, blocks, etc.
— Parking spaces bordered by an obsta-
cle (i.e., a tree, a post or a trailer).
— Parking spaces with objects that ab-
sorb ultrasonic waves such as fabric
and snow.
Display screen, heater and air conditioner, and audio system 4-25
Condition: 'Except for China'/
Loading ...
Loading ...
Loading ...