Loading ...
Loading ...
Loading ...
(114,1)
[ Edit: 2020/ 8/ 19 Model: T32-A ]
2-44 Instruments and controls
position
T32A130827-7DA4961D-ADB9-48C2-AF3E-CB8FF4FAA66E
The position turns on the headlights in
addition to the other lights.
AUTO position (if equipped)
T32A130827-42005CFF-F09D-4D2E-B51A-EA900BA8AB95
When the ignition switch is in the “ON” position
and the headlight switch is in the “AUTO”
position, the headlights, front clearance lights,
instrument panel lights, rear combination lights
and other lights turn on automatically depend-
ing on the brightness of the surroundings.
The headlights will turn on automatically at
twilight or in rainy weather (when the wind-
shield wiper is operated continuously) (if
equipped).
When the ignition switch is placed in the “LOCK”
or “OFF” position, the lights will turn off auto-
matically.
JVI0510X
if equipped
CAUTION:
Do not place any objects on top of the sensor
. The sensor senses the brightness level
and controls the auto headlight/Intelligent
Auto Headlight function. If the sensor is
covered, it reacts as if it is dark, and the
headlights will illuminate.
Automatic headlights off delay (if equipped):
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
You can keep the headlights on for up to 180
seconds after you place the ignition switch in
the “OFF” position and open any door then
close all the doors.
You can adjust the period of the automatic
headlights off delay from 0 seconds (OFF) to
180 seconds. The factory default setting is 45
seconds.
For automatic headlights off delay setting, see
“Lighting” (P.2-25).
Headlight beam
T32A130827-9CEFEA7E-F212-4D2D-A4BD-2DF2318D931E
JVI0856X
Type A
JVI0994X
Type B
To turn on the high beam, push the lever
towards the front position
.
To turn off the high beam, return the lever to
the neutral position
.
To flash the headlights, pull the lever towards
the rearmost position
. The headlights can be
flashed even when the headlights are not on.
If equipped, when the lever is pulled towards
the rearmost position
after the ignition
switch is placed in the “OFF” or “LOCK” position,
the headlight will turn on and stay on for 30
seconds. The lever can be pulled 4 times for up
to 2 minutes.
High beam assist (if equipped)
GUID-A9E44EB1-B8C0-468F-A5B4-1A9C35090997
The high beam assist system will operate when
the vehicle is driven at speeds of approximately
40 km/h (25 MPH) and above. If an oncoming
vehicle or leading vehicle appears in front of
your vehicle when the headlight high beam is
on, the headlight will be switched to the low
beam automatically.
Condition: 'Except for China'/
Loading ...
Loading ...
Loading ...