Loading ...
Loading ...
Loading ...
(171,1)
[ Edit: 2020/ 8/ 19 Model: T32-A ]
For models with ultrasonic sensor
GUID-6074FDDD-A03E-4D79-AE83-4F6D45B64020
How to activate system:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
1. Close all windows and sunroof (if
equipped).
2. Place the ignition switch in the “OFF”
position.
3. Carry the remote controller or the Intelli-
gent Key with you and get out of the
vehicle.
4. Make sure the hood and the back door are
closed. Close and lock all doors with the
remote controller, the Intelligent Key or the
request switch.
If a door or the hood is open, the buzzer will
sound. The buzzer will stop when the door
is correctly closed.
5. Confirm that the security indicator light
comes on. The security indicator light
blinks rapidly for approximately 20 seconds
and then blinks slowly. The system is now
activated. If, during this 20-second time
period, the door is unlocked by the remote
controller, the Intelligent Key or the request
switch, or the ignition switch is placed in
the “ON” position, the system will not
activate.
Even when the driver and/or passengers are
in the vehicle, the system will activate with all
doors locked and the ignition switch off.
Place the ignition switch in the “ON” position
to turn the system off.
If the system malfunctions, the short beep
sounds 5 times when the system is activated.
Have the system checked by a NISSAN dealer.
Theft warning system operation:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
The warning system will give the following
alarm:
. The hazard indicator blinks and the alarm
sounds intermittently for approximately 30
seconds. (The alarm will repeat 8 times.)
. The alarm automatically turns off after
approximately 30 seconds. However, the
alarm reactivates if the vehicle is tampered
with again.
The alarm is activated when:
. operating the door or the back door with-
out using the remote controller, the Intel-
ligent Key or the request switch.
. opening the hood (if equipped).
. the volumetric sensing system (ultrasonic
sensors) is triggered (when it is activated).
. the power supply is disconnected.
How to stop alarm:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
. The alarm will stop by unlocking a door
with the request switch (if equipped) or the
“UNLOCK”
button on the Intelligent
Key.
. The alarm will stop if the ignition switch is
placed in the “ON” position.
Cancel switch for ultrasonic sensor:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
JVP0311X
The ultrasonic sensors (volumetric sensing),
located on the ceiling, detect movement in the
passenger’s compartment. When the theft
warning system is set to the armed position,
it will automatically switch on the ultrasonic
sensor.
It is possible to exclude the ultrasonic (for
example, when leaving pets inside the car or
transporting the vehicle on a ferry).
To exclude the ultrasonic:
1. Close all the windows.
2. Place the ignition switch in the “OFF”
position.
3. Push the cancel switch
located on the
ceiling. The security indicator light will start
flashing rapidly.
4. Close the doors, hood and back door. Lock
them using the remote controller, the
Intelligent Key or the request switch. The
security indicator light will start flashing
faster and a buzzer will sound once.
The ultrasonic sensor is now excluded from the
theft warning system. All other functions of the
system remain activated until the theft warning
system is disarmed again.
Pre-driving checks and adjustments 3-23
Condition: 'Except for China'/
Loading ...
Loading ...
Loading ...