Loading ...
Loading ...
Loading ...
(176,1)
[ Edit: 2020/ 8/ 19 Model: T32-A ]
3-28 Pre-driving checks and adjustments
T32A130827-405C1781-AE61-4D43-A40E-A626866CFB76
WARNING:
. Always be sure the back door has been
closed securely to prevent it from open-
ing while driving.
. Do not drive with the back door open.
This could allow dangerous exhaust
gases to be drawn into the vehicle. See
“Precautions when starting and driving”
(P.5-4) for exhaust gas.
. Do not leave children unattended inside
the vehicle. They could unknowingly acti-
vate switches or controls. Unattended
children could become involved in ser-
ious accidents.
. Always be sure that hands and feet are
clear of the door frame to avoid injury
while closing the back door.
OPERATING MANUAL BACK DOOR
GUID-3A3560E3-6F46-4D3E-8487-69C8562C7AD6
JVP0481X
To open the back door, unlock it and push the
opener switch
. Pull up the back door to open.
The back door can be unlocked by:
. pushing the “UNLOCK”
button on the
key.
. pushing the back door request switch (if
equipped).
. pushing the door handle request switch (if
equipped).
. pushing the power door lock switch to the
unlock position.
To close the back door, pull down until it
securely locks.
OPERATING POWER BACK DOOR (if
equipped)
GUID-436541C3-01DD-453A-AEA7-12BEFABBEB19
To operate the power back door, the shift lever
must be in the “P” (Park) position.
The power back door will not operate if the
battery voltage is low.
Power back door main switch (if equipped)
GUID-AC513CA6-D93A-4569-9CFB-6F34C01F9118
JVP0483X
Power open/close (switch operation)
Manual operation
The power back door operation can be turned
on or off with the power back door main switch
on the instrument panel.
When the power door main switch is pushed to
the “OFF” position
, power operation is avail-
able by using the power back door button on
the Intelligent Key.
NOTE:
. For models with motion-activated back
door: When washing, waxing or maintain-
ing your vehicle, placing or replacing the
body cover, or splashing water to the
area around the kick motion sensor,
place the power back door main switch
in the “OFF”
position.
. If the power open or close operation is
performed consecutively, the safety
mode activates and the operation cannot
be performed for a certain period of time.
In this case, wait for a while and then
perform the operation.
Power open (using switches)
GUID-FEEA27BB-7EA9-4260-927A-54954CB04325
JVP0484X
Power back door switch — Instrument panel
BACK DOOR
Condition: 'Except for China'/
Loading ...
Loading ...
Loading ...