Loading ...
Loading ...
Loading ...
(322,1)
[ Edit: 2020/ 8/ 19 Model: T32-A ]
5-30 Starting and driving
Intelligent 4x4 mode switch is operated
while making a turn, accelerating or
decelerating, or if the ignition switch is
turned off while in the “AUTO” or “LOCK”
mode, you may feel a jolt. This is not a
malfunction.
. Do not operate the Intelligent 4x4 mode
switch with the front wheel spinning.
. Engine idling speed is high while warm-
ing up the engine. Be especially careful
when starting or driving on slippery
surfaces with the Intelligent 4x4 mode
switch set in the AUTO mode.
4WD WARNING
GUID-23709BED-21E1-4D10-B889-D097C5F3D412
If any malfunction occurs in the Four-Wheel
Drive (4WD) system while the engine is running,
warning messages appear in the vehicle in-
formation display.
JVS0411X
If the “4WD system fault” warning appears,
there may be a malfunction in the 4WD system.
Reduce vehicle speed and have your vehicle
checked by a NISSAN dealer as soon as
possible.
The “4WD High Temp. Stop vehicle” (high
temperature) warning
may appear while
trying to free a stuck vehicle due to increased
oil temperature. The driving mode may change
to Two-Wheel Drive (2WD). If this warning is
displayed, stop the vehicle with the engine
idling, as soon as it is safe to do so. Then if the
warning turns off, you can continue driving.
The “Tire size incorrect” warning
may appear
if there is a large difference between the
diameters of front and rear wheels. Pull off
the road in a safe area, with the engine idling.
Check that all tire sizes are the same, that the
tire pressure is correct and that the tires are
not excessively worn. Change the Intelligent
4x4 mode switch to the 2WD mode and do not
drive fast.
If any warning message continues to be
displayed, have your vehicle checked by a
NISSAN dealer as soon as possible.
CAUTION:
. Do not operate the engine on a free roller
when any of the wheels raised.
. If the “4WD system fault” warning ap-
pears while driving, there may be a
malfunction in the 4WD system. Reduce
the vehicle speed and have your vehicle
checked by a NISSAN dealer as soon as
possible. Be especially careful when driv-
ing.
. The power train may be damaged if you
continue driving with the “4WD system
fault” warning on.
4WD MODE INDICATOR LIGHTS
T32A130827-369691F0-AE85-4F02-8C65-5AED24075D5A
The 4WD mode indicator lights ( , ) are
located in the meter.
The 4WD mode indicator lights (
, )
illuminate when the ignition switch is placed
in the “ON” position. The indicator lights turn off
within 1 second.
The 4WD mode indicator lights will display the
mode selected by the Intelligent 4x4 mode
switch while engine is running.
The 4WD LOCK indicator light
illuminates
Condition: 'Except for China'/
Loading ...
Loading ...
Loading ...