Loading ...
Loading ...
Loading ...
(49,1)
[ Edit: 2020/ 8/ 19 Model: T32-A ]
SSS0654A
Rear-facing: Step 2
2. Route the seat belt tongue through the
child restraint and insert it into the buckle
until you hear and feel the latch engage.
SSS0655A
Rear-facing: Step 3
3. Pull the shoulder belt until the belt is fully
extended
. At this time, the seat belt
retractor is in the automatic locking mode
(child restraint mode).
SSS0656A
Rear-facing: Step 4
4. Allow the seat belt to retract
. Pull up on
the shoulder belt to remove any slack in the
belt.
SSS0639B
Rear-facing: Step 5
5. Remove any additional slack from the seat
belt; press downward
and rearward
firmly in the center of the child restraint
with your hand to compress the vehicle
seat cushion and seatback while pulling up
on the seat belt.
SSS0658B
Rear-facing: Step 6
6. Test the child restraint before you place the
child in it
. Push the child restraint from
side to side and tug it forward to make sure
that it is held securely in place.
7. Check that the retractor is in the automatic
locking mode by trying to pull more of the
seat belt out of the retractor. If you cannot
pull any more belt webbing out of the
retractor, the retractor is in the automatic
locking mode.
8. Check to make sure that the child restraint
is properly secured prior to each use. If the
child restraint is loose, repeat steps 3
through 7.
Safety — seats, seat belts and supplemental restraint system 1-27
Condition: 'Except for China'/
Loading ...
Loading ...
Loading ...