Loading ...
Loading ...
Loading ...
(116,1)
[ Edit: 2020/ 8/ 19 Model: T32-A ]
2-46 Instruments and controls
approximately 25 km/h (16 MPH), the headlight
remains the low beam.
To turn off the high beam assist system, turn
the headlight switch to the
position or
select the low beam position by placing the
lever in the neutral position.
Ambient image sensor maintenance:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
JVI1572X
The ambient image sensor for the high beam
assist system is located in front of the inside
rearview mirror. To keep the proper operation
of the high beam assist system and prevent a
system malfunction, be sure to observe the
following:
. Always keep the windshield clean.
. Do not attach a sticker (including transpar-
ent material) or install an accessory near
the ambient image sensor.
. Do not strike or damage the areas around
the ambient image sensor. Do not touch
the sensor lens that is located on the
ambient image sensor.
If the ambient image sensor is damaged due to
an accident, contact a NISSAN dealer.
Daytime running light system
T32A130827-03F4324C-0702-4A59-BBC8-01F30381336D
Even if the headlight switch is * position, the
daytime running lights will come on after
starting the engine.
When the light switch is turned to the
or
position (depending on the country), the
daytime running light will turn off.
HEADLIGHT AIMING CONTROL
T32A130827-A1D7D009-92AF-4459-81E1-BE4387A95870
JVI0477X
Manual type
T32A130827-76E07AD9-CA96-44FA-AB9E-4D2046E5D91B
The headlight aiming control operates when
the ignition switch is in the “ON” position and
the headlight is on to allow the headlight axis
to be adjusted according to the driving condi-
tion.
When driving with no heavy load/luggage or
driving on a flat road, select the normal position
“0”.
If the number of occupants and load/luggage
in the vehicle changes, the headlight axis may
become higher than normal.
If the vehicle is traveling on a hilly road, the
headlights may directly shine on the rearview
and outside mirrors of a vehicle ahead or the
windshield of an oncoming vehicle, which may
obscure other drivers’ vision.
To adjust to the proper aiming height, turn the
switch accordingly. The higher the number,
designated on the switch, the lower the head-
light axis.
Select the switch position by referring to the
following samples.
Condition: 'Except for China'/
Loading ...
Loading ...
Loading ...