Loading ...
Loading ...
Loading ...
(36,1)
[ Edit: 2020/ 8/ 19 Model: T32-A ]
1-14 Safety — seats, seat belts and supplemental restraint system
adjusted to the position best for you.
The belt should be away from your face and
neck, but not falling off your shoulder.
To adjust, pull the release button
and move
the shoulder belt anchor to the proper position
, so that the belt passes over the center of the
shoulder.
Release the button to lock the shoulder belt
anchor into position.
Unfastening seat belts
T32A130827-6CC264E9-D8AD-4962-9D73-34F9C8D92938
Push the button on the buckle. The seat belt
automatically retracts.
Belt hook (if equipped)
T32A130827-702349E6-D2F9-4807-B5A0-7C9EC0BE7832
JVR0438X
Seat belt can be hooked on the belt hook.
Automatic locking mode (if equipped)
GUID-A074F4D6-082E-4594-AF5C-91D3530C4FFD
The front passenger’s and rear three-point seat
belts have an automatic lock mechanism to
use when installing a child restraint system.
This mechanism is referred to as the automatic
locking mode.
If the seat belt is fully extended, the automatic
lock mechanism will be activated and the seat
belt can only retract. The seat belt will not be
able to extend unless the seat belt is fully
retracted once.
To deactivate the automatic locking mode,
detach the seat belt tongue from the buckle
and fully retract the belt to its storing position.
CAUTION:
The automatic locking mode should be used
only for installation of a child restraint
system. During normal seat belt use by a
passenger, the automatic locking mode
should not be activated. The use of the
automatic locking mode by a passenger
may cause uncomfortable seat belt tension.
It can also change the operation of the front
passenger air bag. (See “Supplemental air
bag systems” (P.1-37).)
Checking seat belt operation
T32A130827-71A5C13C-A297-4A48-8CD6-FB07919F9DB4
Seat belt retractors are designed to lock seat
belt movement:
. When the seat belt is pulled quickly from
the retractor.
. When the vehicle slows down rapidly.
To increase your confidence in the seat belts,
check the operation by grasping the shoulder
belt and pulling forward quickly. The retractor
should lock and restrict further belt movement.
If the retractor does not lock during this check,
contact a NISSAN dealer immediately.
SEAT BELT MAINTENANCE
T32A130827-09199535-EE25-4EAC-9D54-D0AED305C354
Periodically check that the seat belt and all the
metal components, such as buckles, tongues,
retractors, flexible wires and anchors, work
properly. If loose parts, deterioration, cuts or
other damage on the seat belt webbing is
found, the entire seat belt assembly should be
replaced.
If dirt builds up in the shoulder belt guide of the
seat belt anchors, the seat belts may retract
slowly. Wipe the shoulder belt guide with a
clean, dry cloth.
To clean the seat belt webbing, apply a mild
soap solution or any solution recommended
for cleaning upholstery or carpet. Then wipe
with a cloth and allow the seat belts to dry in
the shade. Do not allow the seat belts to retract
until they are completely dry.
Condition: 'Except for China'/
Loading ...
Loading ...
Loading ...