Loading ...
Loading ...
Loading ...
(174,1)
[ Edit: 2020/ 8/ 19 Model: T32-A ]
3-26 Pre-driving checks and adjustments
engine starts:
. The front clearance lights will turn on and
remain on as long as the engine is running.
. The doors will be locked and the air
conditioner system may turn on.
. The engine will continue to run for about 10
minutes. Repeat the steps to extend the
time for an additional 10 minutes. See
“Extending engine run time” (P.3-26).
Depress and hold the brake pedal, then place
the ignition switch in the “ON” position before
driving. For further instructions, see “Driving
vehicle” (P.5-19).
EXTENDING ENGINE RUN TIME
GUID-E2384877-E539-44A1-BDE2-966EBBBD70A0
The remote engine start function can be
extended one time by performing the steps
listed in “Remote starting the engine” (P.3-25).
Run time will be calculated as follows:
. The first 10 minute run time will start when
the remote engine start function is per-
formed.
. The second 10 minutes will start immedi-
ately when the remote engine start func-
tion is performed. For example, if the engine
has been running for 5 minutes, and 10
minutes are added, the engine will run for a
total of 15 minutes.
. Extending engine run time will count to-
wards the two remote engine start limit.
A maximum of two remote engine starts, or a
single start with an extension, are allowed
between ignition cycles.
The ignition switch must be cycled to the “ON”
position and then back to the “OFF” position
before the remote engine start procedure can
be used again.
CANCELING A REMOTE ENGINE START
GUID-AE301434-4CF9-46DE-A271-AD5B6D5E033E
To cancel a remote engine start, perform one
of the following:
. Aim the Intelligent Key at the vehicle and
push and hold the remote engine start
button until the front clearance lights turn
off.
. Turn on the hazard indicator flashers.
. Cycle the ignition switch “ON” and then
“OFF”.
. The extended engine run time has expired.
. The first 10 minute timer has expired.
. The engine hood has been opened.
. The vehicle is shifted out of “P” (Park).
. The theft alarm sounds due to illegal entry
into the vehicle.
. The ignition switch is pushed without an
Intelligent Key in the vehicle.
. The ignition switch is pushed with an
Intelligent Key in the vehicle but the brake
pedal is not depressed.
CONDITIONS THE REMOTE ENGINE
START WILL NOT WORK
GUID-6B82DE3B-B7A1-4DB5-AC9C-36D7E2DEBBDB
The remote engine start will not operate if any
of the following conditions are present:
. The ignition switch is placed in the “ON”
position.
. The hood is not securely closed.
. The hazard indicator flashers are on.
. The engine is still running. The engine must
be completely stopped. Wait at least 6
seconds if the engine goes from running
to off. This is not applicable when extend-
ing engine run time.
. The remote engine start
button is not
pushed and held for at least 2 seconds.
. The remote engine start
button is not
pushed and held within 5 seconds of
pushing the “LOCK” button.
. The brake pedal is depressed.
. The doors are not closed and locked.
. The back door is open.
. The Intelligent Key warning message is
displayed in the vehicle information display.
. An Intelligent Key is left inside the vehicle.
. The theft alarm sounds due to illegal entry
into the vehicle.
. Two remote engine starts, or a single
remote engine start with an extension,
have already been used.
. The vehicle is not in the “P” (Park) position.
The remote engine start may display a warning
or indicator in the vehicle information display.
For an explanation of the warning or indicator,
see “Vehicle information display warnings and
indicators” (P.2-30).
HOW TO ENABLE/DISABLE THE REMOTE
ENGINE START FUNCTION
GUID-932AFDF5-FE33-4DC8-86A0-D68DDB1A218C
The remote engine start function can be
enabled or disabled in the vehicle information
display. See “Vehicle Settings” (P.2-24) for addi-
tional information.
Condition: 'Except for China'/
Loading ...
Loading ...
Loading ...