Loading ...
Loading ...
Loading ...
(329,1)
[ Edit: 2020/ 8/ 19 Model: T32-A ]
JVS0403X
When the Intelligent Trace Control is operated
and the “Chassis Control” mode is selected in
the trip computer, the Intelligent Trace Control
graphics are shown in the vehicle information
display. (See “Trip computer” (P.2-37).)
If the chassis control warning message ap-
pears in the vehicle information display, it may
indicate that the Intelligent Trace Control is not
functioning properly. Have the system checked
by a NISSAN dealer as soon as possible. (See
“Vehicle information display warnings and in-
dicators” (P.2-30).)
WARNING:
The Intelligent Trace Control may not be
effective depending on the driving condition.
Always drive carefully and attentively.
When the Intelligent Trace Control is operating,
you may feel a pulsation in the brake pedal and
hear a noise. This is normal and indicates that
the Intelligent Trace Control is operating prop-
erly.
Even if the Intelligent Trace Control is set to
OFF, some functions will remain on to assist the
driver (for example, avoidance scenes).
INTELLIGENT ENGINE BRAKE (Continu-
ously Variable Transmission (CVT)/Dual
Clutch Transmission (DCT) MODELS)
GUID-0FF9DFF6-696E-4189-AD9D-E1914B89F4E4
The Intelligent Engine Brake function adds
subtle deceleration by controlling CVT/DCT
gear ratio, depending on the cornering condi-
tion calculated from driver’s steering input and
plural sensors. This benefit to easier traceability
and less workload of adjusting speed with
braking at corners.
The Intelligent Engine Brake also adds subtle
deceleration with gear ratio control according
to driver’s brake pedal operation.
The Intelligent Engine Brake can be set to ON
(enabled) or OFF (disabled) through the vehicle
information display “Settings” page. See “Vehi-
cle information display” (P.2-21) for more infor-
mation.
Starting and driving 5-37
Condition: 'Except for China'/
Loading ...
Loading ...
Loading ...