Loading ...
Loading ...
Loading ...
(172,1)
[ Edit: 2020/ 8/ 19 Model: T32-A ]
3-24 Pre-driving checks and adjustments
For models without ultrasonic sensor
GUID-F6883F2C-18CE-4385-9BAC-D9C25E45F1E2
How to activate system:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
1. Close all windows and sunroof (if
equipped).
The system can be armed even if the
windows are open.
2. Place the ignition switch in the “OFF”
position.
3. Remove remote controller or the Intelligent
Key from the vehicle.
4. Close all doors, hood and back door. Lock
all doors. The doors can be locked with
remote controller or the Intelligent Key,
door handle request switch, power door
lock switch or mechanical key.
5. Confirm that the security indicator light
comes on. The security indicator light stays
on for about 30 seconds. The vehicle
security system is now pre-armed. After
about 30 seconds the vehicle security
system automatically shifts into the armed
phase. The security light begins to flash
once every approximately 3 seconds. If,
during this 30 seconds pre-arm time peri-
od, the door is unlocked, or the ignition
switch is placed in “ON”, the system will not
alarm.
Even when the driver and/or passengers are
in the vehicle, the system will activate with all
doors, hood, and back door locked with the
ignition switch in the “LOCK” position. When
placing the ignition switch in the “ON” posi-
tion, the system will be released.
Theft warning system operation:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
The vehicle security system will give the
following alarm:
. The hazard indicator or headlight blinks
and the horn sounds intermittently.
. The alarm automatically turns off after
approximately 30 or 50 seconds. However,
the alarm reactivates if the vehicle is
tampered with again.
The alarm is activated by:
. Unlocking the door or opening the back
door without using the button on the
remote controller or the Intelligent Key,
the door handle request switch or the
mechanical key. (Even if the door is opened
by releasing the door inside lock knob, the
alarm will activate.)
. Opening the hood.
How to stop alarm:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
. The alarm will stop only by unlocking a
door by pushing the “UNLOCK” button on
the remote controller or the Intelligent Key.
. The alarm will not stop if the ignition switch
is placed in the “ON” position.
NISSAN ANTI-THEFT SYSTEM (NATS)
GUID-5E437D07-076E-4181-8CCF-57AFFB80C485
The NISSAN Anti-Theft System (NATS) will not
allow the engine to start without the use of the
registered NATS key.
If the engine does not start using the registered
NATS key, it may be due to interference caused
by:
. Another NATS key.
. Automated toll road device.
. Automated payment device.
. Other devices that transmit similar signals.
Start the engine using the following procedure:
1. Remove any items that may be causing the
interference away from the NATS key.
2. Leave the ignition switch in the “ON” posi-
tion for approximately 5 seconds.
3. Place the ignition switch in the “OFF” or
“LOCK” position, and wait approximately 10
seconds.
4. Repeat steps 2 and 3 again.
5. Start the engine.
6. Repeat the steps above until all possible
interferences are eliminated.
If this procedure allows the engine to start,
NISSAN recommends placing the registered
NATS key separate from other devices to avoid
interference.
FCC Notice:
For USA:
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired op-
eration.
Note: Changes or modifications not expressly
approved by the party responsible for com-
pliance could void the user’s authority to
operate the equipment.
For Canada:
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is
subject to the following two conditions: (1)
this device may not cause interference, and
(2) this device must accept any interference,
including interference that may cause un-
desired operation of the device.
Condition: 'Except for China'/
Loading ...
Loading ...
Loading ...