OWNER’S MANUAL - Page 29

For 2021 X-TRAIL.

Loading ...
Loading ...
Loading ...
(29,1)
[ Edit: 2020/ 8/ 19 Model: T32-A ]
Heated seats (if equipped)
GUID-C34B6423-3527-42C0-ADA5-435AFC5F08C4
JVR0525X
The seats can be warmed by built-in heaters.
The switch is located on the center console.
1. Start the engine.
2. Select heat range.
.
For high heat, push the HI (High) side of
the switch
.
.
For low heat, push the LO (Low) side of
the switch
.
.
The indicator light
will illuminate when
the heater is on.
3. To turn off the heater, return the switch to
the level position. Make sure the indicator
light turns off.
The heater is controlled by a thermostat,
automatically turning the heater on and off.
The indicator light will remain on as long as
the switch is on.
When the vehicle’s interior is warmed, or
before you leave the vehicle, be sure to turn
off the switch.
CAUTION:
. The battery could run down if the seat
heater is operated while the engine is not
running.
. Do not use the seat heater for extended
periods or when no one is using the seat.
. Do not put anything on the seat which
insulates heat, such as a blanket, cushion,
seat cover, etc. Otherwise, the seat may
become overheated.
. Do not place anything hard or heavy on
the seat or pierce it with a pin or similar
object. This may result in damage to the
seat heater.
. Any liquid spilled on the heated seat
should be removed immediately with a
dry cloth.
. When cleaning the seat, never use gaso-
line, thinner, or any similar materials.
. If any malfunctions are found or the
heated seat does not operate, turn the
switch off and have the system checked
by a NISSAN dealer.
THIRD ROW SEATS (if equipped)
GUID-6AFED800-DD55-4234-8775-F187F0285680
Folding
GUID-F0E0E98B-1F35-427F-AE1C-9E5024C736F1
JVR0329X
To fold the third row seats flat for maximum
cargo capacity:
1. Make sure the head restraints are all the
way down.
2. Pull the strap
to release the seat.
3. Once released, push the seatback forward
.
To return the third row seats to a seating
position:
Use the pull straps
to raise each seatback.
Pull back until the seatback latches into posi-
tion. Make sure to properly raise each seatback
to an upright and secured position.
WARNING:
When the seat is returned to the normal
seating position, the head restraints must be
returned to the upright position to properly
protect vehicle occupants.
Safety seats, seat belts and supplemental restraint system 1-7
Condition: 'Except for China'/
Loading ...
Loading ...
Loading ...