Loading ...
Loading ...
Loading ...
(352,1)
[ Edit: 2020/ 8/ 19 Model: T32-A ]
5-60 Starting and driving
Action to take:
When the above conditions no longer exist,
the system will resume automatically.
SYSTEM MALFUNCTION
GUID-D1DDB008-4A21-4FE8-BBE0-C73CE7556225
When the RCTA system malfunctions, it will turn
off automatically. The “System fault” warning
message will appear in the vehicle information
display.
NOTE:
If the BSW system stops working, the RCTA
system will also stop working.
Action to take:
Stop the vehicle in a safe location, turn the
engine off and restart the engine. If the
message continues to appear, have the system
checked by a NISSAN dealer.
SYSTEM MAINTENANCE
GUID-650F5094-516C-4F6B-8831-C40FF18C052D
JVS0945X
The two radar sensors for the RCTA systems
are located near the rear bumper. Always keep
the area near the radar sensors clean.
The radar sensors may be blocked by tempor-
ary ambient conditions such as splashing
water, mist or fog.
The blocked condition may also be caused by
objects such as ice, frost or dirt obstructing the
radar sensors.
Check for and remove objects obstructing the
area around the radar sensors.
Do not attach stickers (including transparent
material), install accessories or apply additional
paint near the radar sensors.
Do not strike or damage the area around the
radar sensors. It is recommended that you visit
a NISSAN dealer if the area around the radar
sensors is damaged due to a collision.
For the radio approval numbers and informa-
tion, see “Radio approval number and informa-
tion” (P.9-15).
GUID-790A193B-4EB1-4E55-89F5-8BFBAFBA326A
The speed limiter allows you to set the desired
vehicle speed limit. While the speed limiter is
activated, the driver can perform normal brak-
ing and acceleration, but the vehicle will not
exceed the set speed.
WARNING:
. Always observe posted speed limits. Do
not set the speed over them.
. Always confirm the setting status of the
speed limiter on the vehicle information
display.
When the speed limiter is on, the cruise control
(if equipped) system cannot be operated.
SPEED LIMITER OPERATIONS
GUID-7D727D12-89FC-4770-A277-899333D04B46
The speed limiter can be set at a speed
between the following speeds.
. 30 to 180 km/h (20 to 112 MPH) (for HR13
and R9M engine models)
. 30 to 200 km/h (20 to 124 MPH) (for M9R
engine models)
WAF0491X
The speed limiter set switches are located on
the steering wheel.
1. RES/+ switch
SPEED LIMITER (if equipped)
Condition: 'Except for China'/
Loading ...
Loading ...
Loading ...