Loading ...
Loading ...
Loading ...
(367,1)
[ Edit: 2020/ 8/ 19 Model: T32-A ]
Action to take:
When the conditions listed above are no longer
present, turn the ICC system back on to use the
system.
Condition C:
GUID-572411AA-8577-490B-88E5-8F4E0E52D4D5
JVS0968X
When the ICC system is not operating properly,
the chime sounds and the ICC system warning
(yellow) will appear.
Action to take:
If the warning appears, park the vehicle in a
safe place. Turn the engine off, restart the
engine, resume driving and set the ICC system
again.
If it is not possible to set the system or the
warning stays on, it may indicate that the ICC
system is malfunctioning. Although the ve-
hicle is still driveable under normal condi-
tions, have the vehicle checked. See a NISSAN
dealer for this service.
System maintenance
GUID-673345AA-61EC-452E-92A5-4F7A16CDCC41
JVS0956X
The sensor for the ICC system is located on
the front of the vehicle.
To keep the ICC system operating properly, be
sure to observe the following:
. Always keep the sensor area clean.
. Do not strike or damage the areas around
the sensor.
. Do not cover or attach stickers or similar
objects near the sensor area. This could
cause failure or malfunction.
. Do not attach metallic objects near the
sensor area (brush guard, etc.). This could
cause failure or malfunction.
. Do not alter, remove or paint the front
bumper. Contact a NISSAN dealer before
customizing or restoring the front bumper.
For the radio approval numbers and informa-
tion, see “Radio approval number and informa-
tion” (P.9-15).
CONVENTIONAL (fixed speed) CRUISE
CONTROL MODE
GUID-02268697-A01B-4FB9-AE99-BD499FB826CC
This mode allows driving at speeds:
. between 40 km/h to 144 km/h (25 to 90
MPH) without keeping your foot on the
accelerator pedal (for Korea, Thailand, In-
donesia, Mexico and Australia)
. between 40 km/h to 171 km/h (25 to 106
MPH) without keeping your foot on the
accelerator pedal (for the Middle East)
WARNING:
. In the conventional (fixed speed) cruise
control mode, a warning chime does not
sound to warn you if you are too close to
the vehicle ahead, as neither the pre-
sence of the vehicle ahead nor the
vehicle-to-vehicle distance is detected.
. Pay special attention to the distance
between your vehicle and the vehicle
ahead of you or a collision could occur.
. Always confirm the setting in the ICC
system display.
. Do not use the conventional (fixed speed)
cruise control mode when driving under
the following conditions:
— when it is not possible to keep the
vehicle at a set speed
— in heavy traffic or in traffic that varies
in speed
— on winding or hilly roads
— on slippery roads (rain, snow, ice, etc.)
— in very windy areas
. Doing so could cause a loss of vehicle
control and result in an accident.
Starting and driving 5-75
Condition: 'Except for China'/
Loading ...
Loading ...
Loading ...