Loading ...
Loading ...
Loading ...
(189,1)
[ Edit: 2020/ 8/ 19 Model: T32-A ]
push down the parking brake switch
before opening the driver’s door.
. If a malfunction occurs in the electronic
parking brake system (for example, due
to battery discharge), contact a NISSAN
dealer.
. If the shift lever is moved to the “P” (Park)
position when the brake force is main-
tained by automatic brake hold function
(if equipped), the electronic parking brake
will apply automatically. (CVT/DCT model)
. If the driver’s seat belt is unfastened
when the brake force is maintained by
automatic brake hold function (if
equipped), the electronic parking brake
will apply automatically.
. If the ignition switch is placed in the “OFF”
position when the brake force is main-
tained by automatic brake hold function
(if equipped), the electronic parking brake
will apply automatically.
Manual operation
GUID-904D853F-51E6-4D60-943F-53D00450A7A9
The electronic parking brake will not be auto-
matically applied if the engine is stopped with-
out using the ignition switch (for example, by
engine stalling). In such a case, you have to
apply the parking brake manually.
To apply: Pull the switch up
. The indicator
light
will illuminate.
To release: With the ignition switch in the “ON”
position, depress the brake pedal and push the
switch down
. The indicator light will turn
off.
Before driving, check that the electronic park-
ing brake indicator light
goes out. For
additional information, see “Warning lights,
indicator lights and audible reminders” (P.2-12).
NOTE:
. A buzzer will sound if the vehicle is driven
without releasing the parking brake. See
“Audible reminders” (P.2-20).
. While the electronic parking brake is
applied or released, an operating sound
is heard from the lower side of the rear
seat. This is normal and does not indicate
a malfunction.
. When the electronic parking brake is
frequently applied and released in a short
period of time, the parking brake may not
operate in order to prevent the parking
brake system from overheating. If this
occurs, operate the electronic parking
brake switch again after waiting approxi-
mately 1 minute.
. If the electronic parking brake must be
applied while driving in an emergency,
pull up and hold the parking brake
switch. When you release the parking
brake switch, the parking brake will be
released.
. While pulling up the electronic parking
brake switch during driving, the parking
brake is applied and a chime sounds. The
electronic parking brake indicator light in
the meter and in the parking brake
switch illuminate. This does not indicate
amalfunction.Theelectronicparking
brake indicator light in the meter and in
the parking brake switch turn off when
the parking brake is released.
. When pulling the electronic parking brake
switch up with the ignition switch in the
“OFF” or “ACC” position, the parking brake
switch indicator light will continue to
illuminate for a short period of time.
When towing a trailer (for Australia, New
Zealand, South Africa, Argentina and Europe)
GUID-D104E447-6887-4FAC-B2E9-1062DDCEF362
Depending on the weight of the vehicle and
trailer and the steepness of the slope, there
may be a tendency for the vehicle to move
backwards when starting from a standstill.
When this occurs, you can use the parking
brake switch in the same way as a conven-
tional lever type parking brake.
Before starting on sloping roads when towing a
trailer, be sure to read the following to prevent
the vehicle from moving backward uninten-
tionally.
1. Pull and hold the parking brake switch
while depressing the accelerator pedal
and engaging the clutch (MT models).
2. Release the parking brake switch as soon
as the engine is delivering enough torque
to the wheels.
Pre-driving checks and adjustments 3-41
Condition: 'Except for China'/
Loading ...
Loading ...
Loading ...