Loading ...
Loading ...
Loading ...
(360,1)
[ Edit: 2020/ 8/ 19 Model: T32-A ]
5-68 Starting and driving
1. This indicator indicates the ICC system
status depending on a color.
.
ICC system ON indicator (gray):
Indicates that the Cruise ON/OFF switch
is ON.
.
ICC system set indicator (green):
Indicates that cruising speed is set
.
ICC system warning (yellow):
Indicates that there is a malfunction in
the ICC system.
2. Set distance indicator:
Displays the selected distance between
vehicles set with the DISTANCE switch.
3. Set vehicle speed indicator:
Indicates the set vehicle speed.
4. Vehicle ahead detection indicator:
Indicates whether it detects a vehicle in
front of you.
Operating vehicle-to-vehicle distance
control mode
GUID-B11F4838-3176-4E90-8387-D495F2A0F975
JVS0959X
To turn on the cruise control, quickly push and
release the CRUISE ON/OFF switch
. The ICC
system ON indicator (gray), set distance indi-
cator and set vehicle speed indicator come on
and in a standby state for setting.
JVS0961X
To set cruising speed, accelerate your vehicle
to the desired speed, push the SET/- switch
and release it. (The ICC system set indicator
(green), vehicle ahead detection indicator, set
distance indicator and set vehicle speed in-
dicator come on.) Take your foot off the
accelerator pedal. Your vehicle will maintain
the set speed.
When the SET/- switch
is pushed under the
following conditions, the system cannot be set
and the ICC indicators will blink for approxi-
mately 2 seconds:
. When traveling below 32km/h (20 MPH)
(except for Korea, Thailand and Indonesia)
or 30km/h (20 MPH) (for Korea, Thailand
and Indonesia) and the vehicle ahead is not
detected
. When the shift lever is not in the D (Drive) or
manual shift mode
. When the parking brake is applied
. When the brakes are operated by the driver
When the SET/- switch
is pushed under the
following conditions, the system cannot be set.
A warning chime will sound and a message will
pop up:
. When the VDC/ESP system is off (To use the
ICC system, turn on the VDC/ESP system.
Push the CRUISE ON/OFF switch to turn off
the ICC system and reset the ICC system by
pushing the CRUISE ON/OFF switch again.)
For additional information about the VDC/
ESP system, see “Vehicle Dynamic Control
(VDC)/Electronic Stability Program (ESP)
system” (P.5-35).
. When VDC/ESP (including the traction con-
trol system) is operating
. When a wheel is slipping (To use the ICC
system, make sure the wheels are no long-
er slipping.)
Condition: 'Except for China'/
Loading ...
Loading ...
Loading ...