Loading ...
Loading ...
Loading ...
Entering Sleep Mode
8054-034
The sleep mode function r
educes the amount of power consumed by the machine by disabling power ow to the
operation panel. If no operations will be performed on the machine for a while, such as during a lunch break, you can
save power simply by pressing
on the operation panel.
When in sleep mode
● When the machine enters sleep mode, lights up yellow green.
Situations in which the machine does not enter sleep mode
● The machine will not enter sleep mode in the follo
wing situations:
- When the machine is in operation
- When the Data indicator is lit up or blinking
- When the machine is performing an operation such as adjustment or cleaning
- When a paper jam occurs
- When the menu screen is displayed
- When an error message is displayed on the screen (There are some exceptions. The machine sometimes
enters sleep mode when an error message is displayed.)
- When the SSID/network key screen for Direct Connection is displayed
- When settings are being imported or exported
● If the situation preventing the machine from entering sleep mode continues, the machine performs
automatic adjustment (automatic calibration) to maintain print quality. Calibration uses toner and may
therefore result in a decrease in the lifetime of the toner cartridges.
Changing the Auto Sleep Time Value
Auto Sleep Time is a function that automatically puts the machine into the sleep mode if it remains idle for a
specied length of time. We recommend using the factory default settings ( <Timer/Energy
Settings>(P. 272) ) to reduce power usage. If you want to change the amount of time that elapses before the
machine enters the auto sleep mode, perform the procedure below.
Basic Operations
132
Loading ...
Loading ...
Loading ...