Loading ...
Loading ...
Loading ...
Align the paper guides securely against the edges of the paper
● Paper guides that ar
e too loose or too tight can cause misfeeds or paper jams.
3
Insert the paper slowly into the manual feed slot until it reaches the back of the slot.
● The paper is pulled slightly into the machine after it r
eaches the back of the slot.
● T
o ensure that the paper is loaded squarely, hold it with both hands until the pull-in operation is complete.
● When
loading envelopes or paper with a logo, see
Loading Envelopes(P. 112) or Loading Preprinted
Paper(P
. 115) .
»
Continue to
Specifying Paper Size and Type in the Manual Feed Slot(P. 120)
Printing on the Back Side of Printed Paper (Manual 2-Sided Printing)
● Y
ou can print on the back side of printed paper. Flatten any curls on the printed paper and insert it into the
paper drawer (
Loading Paper in the Paper Drawer(P. 104) ) or manual feed slot, with the side to print
face up (pr
eviously printed side face down).
- You can use only the paper printed with this machine.
- You cannot print on the side that has previously been printed on.
- If the printouts look faded, set the target paper source to <On> in <Manual Back Side Print (2-Sided Only)>.
<Manual Back Side Print (2-Sided Only)>(P. 297)
-
If you are using A5 size paper, the reverse side may not be printed correctly.
LINKS
Available Paper(P. 416)
Basic Operations
111
Loading ...
Loading ...
Loading ...