Loading ...
Loading ...
Loading ...
Keyless entry system (if so equipped)
5-12 Features and controls
5
N00546101124
Your keyless entry system operates on a radio
frequency subject to Federal Communica-
tions Commission (FCC) Rules (For vehicles
sold in U.S.A.) and Industry Canada Rules
(For vehicles sold in Canada). This device
complies with Part 15 of FCC Rules and
Industry Canada licence-exempt RSS stan-
dard(s).
Operation is subject to the following two con-
ditions.
This device may not cause harmful inter-
ference.
This device must accept any interference
received, including interference that may
cause undesired operation.
N00544101250
1. Before replacing the battery, remove static
electricity from your body by touching a
metal grounded object.
2. Remove the screw (A) from the key.
3. With the Mitsubishi mark facing you,
insert the cloth-covered tip of a flat blade
screwdriver into the notch in the key case
and use it to open the case.
NOTE
Be sure to press the buttons correctly when performing the procedures. If you perform the procedures incorrectly, the registered ID code information could
be deleted or the settings could be changed unintentionally. If the registered ID code information is deleted, register the keys again.
Refer to “Customer key programming (Except for vehicles sold in Canada)” on page 5-9.
General information
CAUTION
Changes or modifications not expressly
approved by the manufacturer for compli-
ance could void the user’s authority to oper-
ate the equipment.
Procedure for replacing the key
battery
NOTE
Be sure to perform the procedure with the
Mitsubishi mark facing you. If the
Mitsubishi mark is not facing you when you
open the key case, the buttons may come out.
BK0277700US.book 12 ページ ２０１９年３月８日 金曜日 午前９時２３分
Loading ...
Loading ...
Loading ...