Loading ...
Loading ...
Loading ...
Seat belts
4-18 Seat and restraint systems
4
1. While holding the center seat belt, insert
the latch plate (A) into the slot (F) in the
detachable anchor (C) to release the seat
belt from the detachable anchor.
2. Pass the seat belt through the seat belt
guide (E) and retract it completely toward
the rear trim.
3. After the seat belt is retracted completely,
insert the small latch plate (B) into the
upper slit (G) and the latch plate (A) into
the lower slit (H).
4. Store the detachable anchor between the
seatback and the seat cushion.
N00418401411
A tone and warning light are used to remind
the driver to fasten the seat belt.
The seat belt can be buckled up by inserting
the latch plate (A) into the buckle (D) like
other seat belts.
If the seat belt switches to the Automatic
Locking Retractor (ALR) child restraint
installation function and cannot be pulled
out, detach the latch plate (A) and move the
rear seat fully backward.
Refer to “Installing a child restraint system
using the seat belt” on page 4-27.
To detach
NOTE
Driver’s seat belt
reminder/warning light and
display
BK0277700US.book 18 ページ ２０１９年３月８日 金曜日 午前９時２３分
Loading ...
Loading ...
Loading ...