Loading ...
Loading ...
Loading ...
Blind Spot Warning (BSW) (with Lane Change Assist) (if so equipped)
Features and controls 5-113
5
N00592200082
The Blind Spot Warning (BSW) is a driving
aid system that alerts the driver when another
vehicle which may not be visible through the
outside rearview mirror is traveling in the
next lane behind your vehicle.
When a vehicle in the next lane is traveling at
same speed or faster in the detection areas,
the BSW light in the corresponding outside
rearview mirror will illuminate. If the turn
signal lever is operated to the side where the
BSW light is illuminated, the BSW light will
blink and the system will beep three times to
alert the driver.
Depending on the relative speed between
your vehicle and a vehicle in the next lane,
the BSW will detect up to approximately
230 feet (70 m) from your vehicle (Lane
Change Assist).
N00592300100
The BSW uses two sensors (A) located inside
the rear bumper.
The detection areas are shown as illustrated.
Laser radar specifications
Laser classification
Max average power 45 mW
Pulse duration 33 ns
Wavelength 905 nm
Divergent angle
(horizon x vertical)
28° x 12°
Laser classification label
Blind Spot Warning (BSW)
(with Lane Change Assist)
(if
so equipped)
WARNING
Before using the BSW, read this entire sec-
tion to fully understand the limitations of
this system. Failure to follow instructions
could result in an accident.
Never rely solely on the BSW system when
changing lanes. BSW is an aid only. It is
not a substitute for your safe and careful
driving. Always check visually behind and
all around your vehicle for other vehicles.
The performance of the BSW may vary
depending on driving, traffic and/or road
conditions.
Detection areas
WARNING
BK0277700US.book 113 ページ ２０１９年３月８日 金曜日 午前９時２３分
Loading ...
Loading ...
Loading ...