Loading ...
Loading ...
Loading ...
Replacement of light bulbs
9-32 Vehicle care and maintenance
9
N00943601991
1. To create enough work space, turn the
steering wheel all the way in the direction
opposite to the side you wish to replace.
2. Remove the screw (A), and then pull the
wheel cut moulding (B) outward to
release the three clips (C).
3. Remove the three clips (D), and then pull
back the splash shield (E).
4. While holding down the tab (F), pull out
the socket (G).
5. Turn the bulb (H) counterclockwise to
remove it.
6. To install the bulb, perform the removal
steps in reverse.
N00943701631
1. Open the liftgate.
Front fog lights
*: Front of the vehicle
CAUTION
Do not pull the wheel cut moulding (B) more
than is necessary to release the three clips
(C). Otherwise, the wheel cut moulding
could break.
*: Front of the vehicle
*: Front of the vehicle
NOTE
When refitting each of the clip (D), first
insert part (I) of the clip into the hole and
then press part (J) into it.
Rear combination lights
BK0277700US.book 32 ページ ２０１９年３月８日 金曜日 午前９時２３分
Loading ...
Loading ...
Loading ...