Loading ...
Loading ...
Loading ...
Rear seats
Seat and restraint systems 4-7
4
Pull the seat adjusting lever up and slide the
seat forward or backward to the desired posi-
tion. Release the adjusting lever to lock the
seat in place.
N00402801032
Pull the lever up and adjust the seatback by
hand to the desired position, and release the
lever. The seatback will lock in place.
To adjust the seat forward or
backward
NOTE
You can adjust the seat forward or backward
on either side separately.
WARNING
To make sure that the seat is securely
locked, try to move it forward or back-
ward without using the adjusting lever.
CAUTION
When sliding the rear seat rearward, make
sure that there are no items behind the seat.
To adjust the seatbacks
CAUTION
If your vehicle is equipped with the arm rest
and the seatback is reclined while the drink
holder is used, drinks could be spilled. If the
spilt drink is very hot, you could be burnt.
NOTE
You can adjust the seatback forward or back-
ward on either side separately.
If your vehicle is equipped with the cargo
area cover, the seatbacks cannot be reclined
unless the cargo area cover is installed in the
rear position or removed.
Refer to “Cargo area cover” on page 5-223.
WARNING
To reduce the risk of serious injury or
death in the event of an accident or sud-
den stop, all seatbacks should be kept in
the upright position while the vehicle is in
motion.
Seat belt performance during an accident
can be adversely affected if the seatbacks
are reclined. The more a seatback is
reclined, the more likely seat belt perfor-
mance will be adversely affected. If the
seat belt is not properly positioned against
the body during an accident, there is
increased risk you will slide under the belt
and receive serious injury or death.
When a person is sitting in the center seat-
ing position of the rear seats, the two sides
of the rear seats must have the same for-
ward/backward position and the same
seatback angle.
BK0277700US.book 7 ページ ２０１９年３月８日 金曜日 午前９時２３分
Loading ...
Loading ...
Loading ...