Loading ...
Loading ...
Loading ...
Combination headlights and dimmer switch
5-198 Features and controls
5
If the AHB determines that its performance
has been degraded, the warning display will
appear.
This can occur when:
Foreign objects, such as dirt, snow or ice,
adhere to the windshield of the sensor
portion.
In adverse weather conditions, such as
rain, snow, sandstorms, etc.
A front vehicle or an oncoming vehicle is
splashing water, snow or dirt.
When the sensor performance returns, the
AHB will resume operation.
If the warning display does not disappear
after waiting for a while, there is a possibility
that the sensor has a malfunction. Contact an
authorized Mitsubishi Motors dealer for
inspection of the sensor.
N00563201263
This function turns on the front side-marker
and parking lights for approximately 30 sec-
onds after the UNLOCK button on the key is
pressed when the combination headlights and
dimmer switch is in the “OFF” or “AUTO”
position (vehicles equipped with the auto-
matic light control). The welcome light func-
tion will operate only when it is dark outside
the vehicle.
N00547301194
This function turns on the headlights in the
low beam setting for approximately 30 sec-
onds after the ignition switch is turned to the
“OFF” position or the operation mode is put
in OFF.
1. Turn the combination headlights and dim-
mer switch to the “OFF” or “AUTO”
position (vehicles equipped with the auto-
matic light control).
2. Turn the ignition switch to the “OFF”
position or put the operation mode in
OFF. Also, if a key was used to start the
engine, remove the key from the ignition
switch.
3. Within 60 seconds of turning the ignition
switch to the “OFF” position or putting
the operation mode in OFF, pull the turn
signal lever toward you.
Windshield is dirty
Welcome light
NOTE
While the welcome light function is operat-
ing, perform one of the following operations
to cancel the function.
• Press the LOCK button on the key.
• Turn the combination headlights and dim-
mer switch to the “ ” or “ ” position.
• Turn the ignition switch to the “ON” posi-
tion or put the operation mode in ON.
It is possible to modify functions as follows:
• The headlights can be set to come on in the
low beam setting.
• The welcome light function can be deacti-
vated.
For details, consult a Mitsubishi Motors
dealer.
On vehicles equipped with Smartphone Link
Display Audio, screen operations can be
used to make the adjustment.
Refer to the separate owner’s manual for
details.
Coming home light
BK0277700US.book 198 ページ ２０１９年３月８日 金曜日 午前９時２３分
Loading ...
Loading ...
Loading ...