Loading ...
Loading ...
Loading ...
Forward Collision Mitigation system (FCM) (if so equipped)
Features and controls 5-111
5
N00595200025
If the system becomes temporarily unavail-
able due to the high or low temperature of the
sensor, the following message will appear on
the information screen of the multi-informa-
tion display, the indicator will come on in
the instrument cluster, and the FCM will
automatically be turned off.
After the temperature of the sensor has been
in range, the system will automatically return
to operation.
If the message continues showing, there is a
possibility that the FCM has a malfunction.
Contact an authorized Mitsubishi Motors
dealer for inspection of the sensor.
N00595300055
If the FCM detects a malfunction in the sys-
tem, either of the following messages will
appear on the information screen of the multi-
information display, the indicator will
come on in the instrument cluster, and the
FCM will automatically be turned off.
If the message remains even after the ignition
switch is turned to the “OFF” position and
then turned back to “ON” position or the
operation mode is put in OFF, and then turned
back to “ON”, please contact your authorized
Mitsubishi Motors dealer.
If the display keeps showing the message,
there is a possibility that the FCM has a mal-
function.
Contact an authorized Mitsubishi Motors
dealer.
N00593400137
The sensor (A) is located inside the wind-
shield and front bumper {Forward Collision
Mitigation system with High-Speed Braking
Capability (FCM-HSBC) only} as shown in
the illustration.
The sensor is shared in the following sys-
tems:
Forward Collision Mitigation system
(FCM)*
Lane Departure Warning (LDW)*
Automatic High Beam (AHB)*
Adaptive Cruise Control System (ACC)*
*: if so equipped
Sensor is too hot or cold FCM deactivation due to fault
NOTE
If the sensor or its surrounding area becomes
extremely hot (after prolonged exposure to
direct sunlight, for example), the “FCM
SERVICE REQUIRED” message may
appear.
After the temperature of the sensor or its sur-
rounding area has been in range, if the mes-
sage remains even after restarting the engine,
please contact an authorized Mitsubishi
Motors dealer.
Handling of the sensor
BK0277700US.book 111 ページ ２０１９年３月８日 金曜日 午前９時２３分
Loading ...
Loading ...
Loading ...