OWNER'S MANUAL - Page 270

For 2020 ECLIPSE CROSS.

Loading ...
Loading ...
Loading ...
Head Up Display (HUD) (if so equipped)
Features and controls 5-189
5
1. With the ignition switch is in “ON” posi-
tion or the operation mode is in ON, push
the switch to open the display.
2. The launch screen will be displayed, and
then information will be displayed.
1. When the display is open, push the
switch.
2. The ending screen will be displayed, and
then the display will close.
NOTE
When you are wearing sunglasses, the dis-
play may be difficult to see. Remove your
sunglasses or adjust the brightness of the dis-
play.
Refer to “Adjusting the brightness of the dis-
play” on page 5-190.
If the battery is disconnected or the battery
voltage is low, the display will return to the
default angle and may be difficult to see. If
this occurs, adjust the angle of the display.
Refer to “Adjusting the angle of the display”
on page 5-190.
It may be difficult to see the display depend-
ing on the weather conditions (rain, snow,
direct sunlight, temperature, etc.). If this
occurs, adjust the angle and brightness of the
display.
Refer to “Adjusting the angle of the display”
on page 5-190 and “Adjusting the brightness
of the display” on page 5-190.
Using the HUD
NOTE
If the display does not open or close when
the switch is pushed, check that there are
no objects near the display obstructing its
movement. If the display does not open or
close even though there are no obstructions,
contact an authorized Mitsubishi Motors
dealer or a repair facility of your choice to
have the system checked.
Opening the display
NOTE
If the HUD was open when the ignition
switch was turned to the “OFF” position or
the operation mode was put in OFF, the HUD
will open automatically when the ignition
switch is turned to the “ON” position or the
operation mode is put in ON.
If the HUD was close when the ignition
switch was turned to the “OFF” position or
the operation mode was put in OFF, the HUD
will not open automatically when the igni-
tion switch is turned to the “ON” position or
the operation mode is put in ON.
Closing the display
BK0277700US.book 189 ページ 2019年3月8日 金曜日 午前9時23分
Loading ...
Loading ...
Loading ...