Loading ...
Loading ...
Loading ...
Child restraint systems
4-26 Seat and restraint systems
4
N00419001212
N00419101314
1. In order to securely fasten the tether strap,
remove the head restraint from the loca-
tion where you wish to install the child
restraint system.
Refer to “Head restraints” on page 4-9.
2. Adjust the rear seat to its most rearward
position.
Refer to “Rear seats” on page 4-6.
3. Push the anchor connectors (A) on the
child restraint system into the lower
anchors (B) in accordance with the
instructions provided by the child restraint
system’s manufacturer.
Remember, the lower anchors (B) pro-
vided with your vehicle are designed to
secure suitable child restraint systems
compatible with the LATCH system in
the outboard positions of the rear seats
only. The anchor connectors are NOT
designed to secure a suitable child
restraint system in the center seating
position of the rear seat.
Examples of child restraint sys-
tems compatible with the LATCH
system
A- Rear-facing child restraint system
B- Front-facing child restraint system
C- Child restraint system lower anchor
connectors
D- Tether strap
(These are only examples.)
CAUTION
Do not sit in the center seating position of
the rear seat when installing a child restraint
system on the left side of the rear seat.
Using the LATCH system
NOTE
On vehicles equipped with the cargo area
cover, install the cargo area cover in the rear
position or remove it.
Refer to “Cargo area cover” on page 5-223.
A- Connector
B- Lower anchor
NOTE
In order to secure a child restraint system
compatible with the LATCH system, use the
lower anchor points in the outboard positions
of the rear seat. It is not necessary to use the
vehicle’s seat belt. The vehicle’s seat belt,
however, MUST be used to secure a child
restraint system in the center seating position
of the rear seat.
BK0277700US.book 26 ページ ２０１９年３月８日 金曜日 午前９時２３分
Loading ...
Loading ...
Loading ...