Loading ...
Loading ...
Loading ...
Child restraint systems
4-28 Seat and restraint systems
4
1. Remove the head restraint from the loca-
tion in which you wish to install a child
restraint system.
Refer to “Head restraints” on page 4-9.
2. Adjust the seat where the child restraint
system will be installed to the most rear-
ward position.
3. Adjust the seatback of the seat where the
child restraint system will be installed as
follows.
[For front passenger’s seat]
Adjust the seatback angle to six steps
rearward from the most upright position.
Refer to “Front seats: To adjust the seat-
backs” on page 4-5.
[For rear seats]
Adjust the seatback angle to four steps
rearward from the most upright position.
Refer to “Rear seats: To adjust the seat-
backs” on page 4-7.
4. Place the child restraint system on the
seat.
5. Route the seat belt through the child
restraint system according to the instruc-
tions provided by the child restraint sys-
tem’s manufacturer. Then insert the seat
belt latch plate into the buckle. Make sure
you hear a “click” when you insert the
latch plate into the buckle.
6. To activate the ALR child restraint instal-
lation function, slowly pull the shoulder
part of the belt all the way out of the
retractor until it stops. Then let the belt
feed back into the retractor.
7. After the belt has retracted, tug on it.
If the belt is in the ALR function, you will
not be able to pull it out. If the webbing
can be pulled out from retractor, the ALR
function has not been activated and you
will need to repeat steps 6 and 7.
8. After confirming that the belt is locked,
grab the shoulder part of the belt near the
buckle and pull up to remove any slack
from the lap part of the belt allowing the
slack to feed into the retractor. Remember,
if the lap belt portion is not tight, the child
restraint system will not be secure. It may
help to put your weight on the child
restraint system and/or push on its seat-
back while pulling up on the belt (See
illustration).
9. Push and pull the child restraint system in
all directions to check that it is installed
securely.
If the child restraint system is not installed
securely, proceed to step 10.
BK0277700US.book 28 ページ ２０１９年３月８日 金曜日 午前９時２３分
Loading ...
Loading ...
Loading ...