Loading ...
Loading ...
Loading ...
Jack and tools
For emergencies 8-5
8
6. When you do not see any more steam or
spray, open the hood. Look for obvious
leaks, such as a split radiator hose. Be
careful as components will be hot. Any
leak source must be repaired.
7. If there is no obvious leak source, check
the coolant level in the engine coolant
reserve tank. If there is none, or if it is too
low, slowly add coolant.
8. If the engine coolant reserve tank needs
coolant, you will probably also need to
add coolant to the radiator. Do not loosen
or remove the radiator cap until the engine
has cooled down.
9. Start the engine, and slowly add coolant,
up to the bottom of the filler neck. Use
plain water if you have to (and replace it
with the right coolant as soon as possible).
10. Replace the radiator cap and tighten it
fully. Check the engine coolant tempera-
ture display on the multi-information dis-
play. You can start driving again when the
high coolant temperature warning does
not come on.
11. Have the system inspected by your autho-
rized Mitsubishi Motors dealer or a repair
facility of your choice.
N00836601435
The tools and jack are stored under the lug-
gage floor board of the luggage compartment.
1. Lift up the luggage floor board. Refer to
“Luggage floor board” on page 5-226.
2. Retract the jack and remove it from its
installation fitting (A).
WARNING
Removing the radiator cap could scald
you with escaping hot water or steam.
When checking the radiator level, cover
the cap with a cloth before trying to
remove it. Turn it slowly counterclock-
wise, without pressing down, to the first
notch. The pressure in the system will then
be let out. When the pressure is COM-
PLETELY LET OUT, press down and
keep turning the cap counterclockwise
until it comes off.
Jack and tools
Storage
1- Tools
2- Jack
Tools
1- Bar
2- Wheel nut wrench
Removing and storing the jack
To remove
BK0277700US.book 5 ページ ２０１９年３月８日 金曜日 午前９時２３分
Loading ...
Loading ...
Loading ...