Loading ...
Loading ...
Loading ...
Combination headlights and dimmer switch
Features and controls 5-195
5
N00593600100
1. Rotate the light switch to “ ” position
or “AUTO” position when the engine is
running.
2. Press the AHB switch.
The AHB is activated and the indicator is
illuminated.
If the AHB switch is pressed again, the
AHB will be deactivated and AHB indica-
tor will go off.
1. Pull the turn signal lever toward you.
2. The AHB indicator will go off.
3. The AHB switch is pressed again, the
AHB will be activated.
1. Pull the turn signal lever toward you.
2. The AHB indicator will go off and the
high beam indicator illuminates.
3. The AHB switch is pressed again, the
AHB will be activated.
N00593700055
The high beam headlights illuminate when all
of the following conditions are met:
Your vehicle speed exceeds approxi-
mately 33 mph (53 km/h).
It is dark ahead of your vehicle.
There are no vehicles in front or oncom-
ing vehicles, or none of their exterior
lights are illuminating.
The low beam headlights illuminate when
any of the following conditions occur:
Your vehicle speed does not exceed
approximately 28 mph (45 km/h).
It is bright ahead of your vehicle.
An exterior light of a vehicle in front or
oncoming vehicle is illuminating.
How to use the AHB
NOTE
If the headlights are on when the light switch
is in the “AUTO” position, the AHB works.
You can switch the headlight beams
(high/low) manually by operating the lever
even if the AHB is working.
Refer to “Dimmer (high/low beam change)”
on page 5-194.
If the lever is operated manually, the AHB
indicator will go off and the AHB will be
deactivated.
Refer to “Manual switching” on page 5-195.
The AHB is not deactivated when you pull
the lever slightly (operation of the headlight
flasher).
Manual switching
Switching to low beam
Switching to high beam
Automatic switching conditions
BK0277700US.book 195 ページ ２０１９年３月８日 金曜日 午前９時２３分
Loading ...
Loading ...
Loading ...