Loading ...
Loading ...
Loading ...
How to change a tire
8-6 For emergencies
8
1. Retract the jack, then return it to its origi-
nal position.
2. Extend the jack and firmly secure it in its
storage area, then lower the luggage floor
board.
N00836901904
Before changing a tire, first stop your vehicle
in a safe, flat location.
1. Park the vehicle on level and stable
ground.
2. Set the parking brake firmly.
3. Move the selector lever to the “P”
(PARK) position and turn the ignition
switch (the engine switch) to the “OFF”
position.
4. Turn on the hazard warning flashers and
set up a warning sign, such as a warning
triangle or flashing signal lights, at an
adequate distance from the vehicle, and
have all your passengers leave the vehicle.
5. To prevent the vehicle from rolling when
it is raised on the jack, place chocks or
blocks (A) at the tire that is diagonally
opposite from the tire (B) you are chang-
ing.
6. Get the jack, bar and wheel nut wrench
ready.
(Refer to “Jack and tools” on page 8-5.)
To store
To retract
To retract
To extend
How to change a tire
WARNING
Be sure to apply chocks or blocks to the
correct tire when jacking up the vehicle. If
the vehicle moves while jacked up, the
jack could slip out of position, leading to
an accident.
NOTE
The chocks shown in the illustration do not
come with your vehicle. It is recommended
that you purchase chocks or blocks and keep
them in the vehicle for use if needed.
If chocks or blocks are not available, use
stones or any other objects that are large
enough to hold the wheel in position.
BK0277700US.book 6 ページ ２０１９年３月８日 金曜日 午前９時２３分
Loading ...
Loading ...
Loading ...