Loading ...
Loading ...
Loading ...
Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped)
5-34 Features and controls
5
N00562001091
Your F.A.S.T.-key operates on a radio fre-
quency subject to Federal Communications
Commission (FCC) Rules (For vehicles sold
in U.S.A.) and Industry Canada Rules (For
vehicles sold in Canada). This device com-
plies with Part 15 of FCC Rules and Industry
Canada’s applicable licence-exempt RSS
standard(s). Operation is subject to the fol-
lowing two conditions.
This device may not cause harmful inter-
ference, and
This device must accept any interference
received, including interference that may
cause undesired operation of this device.
N00562101106
1. Before replacing the battery, remove static
electricity from your body by touching a
metal grounded object.
2. Remove the emergency key from the key.
Refer to “Emergency key” on page 5-27.
3. With the Mitsubishi mark facing you,
insert the cloth-covered tip of a flat blade
screwdriver into the notch in the case and
use it to open the case.
4. Remove the old battery.
5. Install a new battery with the + side (A)
up.
6. Close the case firmly.
7. Install the emergency key removed in step
2.
8. Check the keyless entry system to see that
it works.
NOTE
Be sure to press the buttons correctly when performing the procedures. If you perform the procedures incorrectly, the settings could be changed uninten-
tionally.
General information
CAUTION
Changes or modifications not expressly
approved by the party responsible for com-
pliance could void the user’s authority to
operate the equipment.
Procedure for replacing the key
battery
NOTE
Be sure to perform the procedure with the
Mitsubishi mark facing you. If the
Mitsubishi mark is not facing you when you
open the case, the transmitter may come out.
+ side
- side
Coin type
battery
CR2032
BK0277700US.book 34 ページ ２０１９年３月８日 金曜日 午前９時２３分
Loading ...
Loading ...
Loading ...