Loading ...
Loading ...
Loading ...
Electronic immobilizer (Anti-theft starting system)
Features and controls 5-5
5
Only keys that have been programmed to the
vehicle’s electronics can be used to start the
vehicle.
If you lose the key, you can order a key from
your authorized Mitsubishi Motors dealer by
referring to the key number.
To prevent vehicle theft, the ID code for the
vehicle keys must be changed.
Take your vehicle and all remaining keys to
your authorized Mitsubishi Motors dealer to
have your ID code changed.
To add a key, you must already have two reg-
istered keys. You need to register the ID code
to the vehicle.
Registering the ID code can be done by your-
self (except for vehicles sold in Canada), or
by your authorized Mitsubishi Motors dealer.
For you to register the ID code yourself, fol-
low the “Customer key programming” proce-
dure below.
If you choose to have your authorized
Mitsubishi Motors dealer register the ID
code, take your vehicle and all remaining
keys to your authorized Mitsubishi Motors
dealer.
N00562201208
You can program new keys to the system if
you have two valid (already registered) keys
and blank immobilizer key (specially cut for
your vehicle at your Mitsubishi Motors
dealer) by doing the following:
1. Insert the first valid key into the ignition
switch and turn the key to the “ON” posi-
tion for 5 seconds.
2. Turn the key to the “OFF” position and
remove the first key.
3. Within 30 seconds of removing the first
key, insert the second valid key into the
ignition and turn it to the “ON” position.
Approximately 10 seconds later, the
immobilizer display will start to blink.
4. When the immobilizer display starts
blinking, turn the second valid key to the
“OFF” position and remove it. Within
30 seconds after doing so, insert a blank
immobilizer key into the ignition switch
and turn it to the “ON” position. Perform
this operation no more than 30 seconds
after the immobilizer display starts blink-
ing. When registration of the ID code is
complete, the immobilizer display will
come on for 30 seconds then go off. If an
error occurs, the blinking immobilizer dis-
play will go off during the procedure.
Electronic immobilizer is not compatible
with commercially available remote starting
systems. Use of commercially available
remote starting systems may result in vehicle
starting problems and a loss of security pro-
tection.
A system failure is suspected when the igni-
tion switch is turned to the “START” posi-
tion, and the engine does not start. In such a
case, contact an authorized Mitsubishi
Motors dealer.
Replacement keys
NOTE
Additional keys
NOTE
You are provided with two keys, but you
may register up to eight keys.
Customer key programming
(Except for vehicles sold in
Canada)
BK0277700US.book 5 ページ ２０１９年３月８日 金曜日 午前９時２３分
Loading ...
Loading ...
Loading ...