Loading ...
Loading ...
Loading ...
Headlight leveling switch (if so equipped)
Features and controls 5-199
5
4. The headlights will come on in the low
beam setting for approximately 30 sec-
onds. After the headlights go off, the
headlights can be turned on again in the
low beam setting for approximately
30 seconds by pulling the turn signal lever
toward you within 60 seconds of turning
the ignition switch to the “OFF” position
or putting the operation mode in OFF. To
turn on the headlights again after 60 sec-
onds of turning the ignition switch to the
“OFF” position or putting the operation
mode in OFF, repeat the process from step
1.
N00537101131
The direction of the headlight beam (the
direction in which the light shines) alters
according to the number of people and the
load in the vehicle. Lower the headlight angle
if it is too high due to the number of people
and/or the load in the vehicle so that the head-
lights’ glare does not distract the drivers of
approaching vehicles. First set the light
switch to the “ ” position, then turn the
headlight leveling switch knob to lower the
beam. The greater the number on the head-
light leveling switch knob, the lower the
beam will point.
Set the switch to the appropriate position so
that the headlight beam is level with the road.
N00522601604
When changing lanes, or to making a gradual
turn, hold the lever in the “lane change” posi-
NOTE
While the coming home light function is
operating, perform one of the following
operations to cancel the function.
• Pull the turn signal lever toward you.
• Turn the combination headlights and dim-
mer switch to the “ ” or “ ” position
or put the operation mode in ON.
• Turn the ignition switch to the “ON” posi-
tion or put the operation mode in ON.
It is possible to modify functions as follows:
• The time that the headlights remain on can
be changed.
• The coming home light function can be
deactivated.
For details, consult a Mitsubishi Motors
dealer.
On vehicles equipped with Smartphone Link
Display Audio, screen operations can be
used to make the adjustment.
Refer to separate owner’s manual for details.
Headlight leveling switch (if
so equipped)
NOTE
WARNING
To avoid distraction while driving, always
perform headlight adjustments before
vehicle operation.
NOTE
Start adjusting when the knob is at the “0”
position (when the beam is at its highest).
Keep the knob in the “0” position except
when using the knob to lower the headlight
beam angle.
Always return the knob to the “0” position
when the load is removed and the people
have left the vehicle.
Turn signal lever
BK0277700US.book 199 ページ ２０１９年３月８日 金曜日 午前９時２３分
Loading ...
Loading ...
Loading ...