Loading ...
Loading ...
Loading ...
Seat belts
4-20 Seat and restraint systems
4
N00406501138
When the seat belts for the rear outboard seat-
ing positions are not used, the seat belts can
be stored.
Put the seat belt webbing in the back slot (A)
on the clip and insert the metal plate of the
latch plate into the front slot (B) as shown in
the illustration.
N00406701202
If your seat belt is not long enough, even
when fully extended, a seat belt extender
must be obtained. The extender may be used
for either of the front seats.
WARNING
Always adjust the shoulder belt anchor so
that the shoulder belt is positioned across
the center of your shoulder without touch-
ing your neck. The shoulder belt should
not be able to fall off your shoulder. Fail-
ure to follow this instruction can adversely
affect seat belt performance and increase
the risk of serious injury or death in the
event of an accident.
Adjust the shoulder belt anchor only when
the vehicle is not in motion.
Make sure the anchor is securely locked in
position after adjusting it.
Storing the rear seat belts (out-
board seating positions)
Seat belt extender
WARNING
The extender should only be used if the
existing belt is not long enough. Anyone
who can use the standard seat belt should
not use an extender. Unnecessary use of an
extender can adversely affect seat belt
performance in an accident.
When not required, the extender must be
removed and stowed.
BK0277700US.book 20 ページ ２０１９年３月８日 金曜日 午前９時２３分
Loading ...
Loading ...
Loading ...