Loading ...
Loading ...
Loading ...
Multi-information display
Features and controls 5-153
5
N00578400048
When the ignition switch is turned to the
“ON” position or the operation mode is put in
ON, the system check screen is displayed for
approximately 4 seconds. If there is no fault,
the information screen is displayed.
If there is a fault, the screen changes to warn-
ing display.
Refer to “Warning display list” on page
5-165.
N00575201026
Shows the approximate driving range (how
many more miles or kilometers you can
drive). When this driving range falls below
30 miles (50 km), “---” is displayed.
Refuel as soon as possible.
N00575301027
This displays the average fuel consumption
from the last reset to the present.
There are 2 types of mode settings of manual
reset and automatic reset.
Refer to “Changing the reset mode for aver-
age fuel consumption and average speed” on
page 5-157.
For information on how to change the aver-
age fuel consumption display setting, refer to
“Changing the function settings” on page
5-155.
CAUTION
The customer is responsible for making sure
that regular inspections and maintenance and
periodic inspections and maintenance are
performed.
Inspections and maintenance must be per-
formed to prevent accidents and malfunc-
tions.
NOTE
The “---” display cannot be reset while the
ignition switch or the operation mode is in
ON.
When “---” is displayed, after a certain dis-
tance and a certain period of time, the dis-
play is reset and the time until the next
periodic inspection is displayed.
If you accidentally reset the display, consult
an authorized Mitsubishi Motors dealer for
assistance.
System check screen
Driving range display
NOTE
The driving range is determined based on the
fuel consumption data. This may vary
depending on the driving conditions and hab-
its. Treat the distance displayed as just a
rough guideline.
When you refuel, the driving range display is
updated.
However, if you only add a small amount of
fuel, the correct value will not be displayed.
Fill to a full tank whenever possible.
When your vehicle is stopped on an
extremely steep hill, the driving range value
may, change. This is due to the movement of
fuel in the tank and does not indicate any
breakdown.
The display setting can be changed to the
preferred units (miles or km).
Refer to “Changing the function settings” on
page 5-155.
Average fuel consumption dis-
play
NOTE
The average fuel consumption display can be
reset separately in both auto reset mode and
manual reset mode.
“---” is displayed when the average fuel con-
sumption cannot be measured.
The initial (default) setting is “Auto reset
mode”.
NOTE
BK0277700US.book 153 ページ ２０１９年３月８日 金曜日 午前９時２３分
Loading ...
Loading ...
Loading ...