Loading ...
Loading ...
Loading ...
Tire pressure monitoring system (TPMS)
Features and controls 5-127
5
N00532701389
When the ignition switch is turned to the
“ON” position or the operation mode is put in
ON, the tire pressure monitoring system
warning light normally illuminates and goes
off a few seconds later.
If one or more of the vehicle tires (except for
the spare tire) is significantly under-inflated,
the warning light will remain illuminated
while the ignition switch is in the “ON” posi-
tion or the operation mode is put in ON.
Refer to “If the warning light / display illumi-
nates while driving” on page 5-129 and take
the necessary measures.
NOTE
The TPMS is not a substitute for regularly
checking tire inflation pressures.
Be sure to check the tire inflation pressures
as described in “Tires” on page 9-12.
The tire inflation pressure sensor (B) is
installed in the illustrated location.
• On vehicles equipped with Type 1 sensor
which has the metallic air valve (C), replace
grommet and washer (D) with the new ones
when the tire is replaced.
• On vehicles equipped with Type 2 sensor
which has the rubber air valve (E), replace
rubber air valve (E) with new one when the
tire is replaced.
For details, please contact your authorized
Mitsubishi Motors dealer.
Tire pressure monitoring sys-
tem warning light / display
NOTE
Type 1
Type 2
NOTE
In addition, the warning display is displayed
on the information screen in the multi-infor-
mation display.
BK0277700US.book 127 ページ ２０１９年３月８日 金曜日 午前９時２３分
Loading ...
Loading ...
Loading ...