Loading ...
Loading ...
Loading ...
Adaptive Cruise Control System (ACC) (if so equipped)
Features and controls 5-95
5
While the ACC system is turned on (in the
standby state), if you push down the “SET -”
switch when a vehicle in front is detected
while your vehicle is stopped and you are
depressing the brake pedal, “HOLD” will
appear and the vehicle speed will be set to
20 mph (30 km/h).
You can set the speed anywhere from approx-
imately 20 to 110 mph (30 to 180 km/h).
While a vehicle in front is being detected and
your vehicle speed is between approximately
0 to 20 mph (0 to 30 km/h), you can activate
the ACC. In this case, the set speed will be set
at 20 mph (30 km/h).
The ACC cannot otherwise be activated while
your vehicle is traveling less than 20 mph
(30 km/h) or greater than 110 mph
(180 km/h).
N00581300038
The speed of your vehicle will be maintained
at the speed you have set. The speed can be
set between approximately 20 to 110 mph (30
to 180 km/h).
N00581400042
The ACC will maintain the distance to the
front vehicle and will apply the brakes auto-
matically when the system judges braking is
necessary. The distance can be selected from
four levels.
When the front vehicle stops, the ACC will
automatically apply the brakes to stop your
vehicle.
After the vehicle stops, the ACC system auto-
matically enters the stationary vehicle hold
state. “HOLD” appears.
While the ACC system is in the stationary
vehicle hold state, if it is possible to resume
following the vehicle in front because it has
started moving, “ACC READY TO
RESUME” will appear on the information
screen of the multi-information display. To
start moving again, press the “RES+” switch
or depress the accelerator pedal.
NOTE
When any of the following conditions are
present, the ACC will not activate.
• When your vehicle speed is more than
110 mph (180 km/h).
• When your vehicle is driven at speeds
between approximately 0 to 20 mph (0 to
30 km/h) and the ACC is not detecting a
vehicle in front.
• When ASC is in the OFF position.
• While ABS, ASC or TCL is activated.
• When the selector lever is in positions other
than “D” (DRIVE).
• While the brake pedal is depressed (only
while the vehicle is moving).
• While the parking brake is applied.
• When the ACC system has judged that the
performance for detecting a front vehicle is
degraded.
• When an abnormality in the ACC system
has been detected.
• When the driver’s seat belt is unfastened.
• When the driver’s door is opened.
• When the vehicle is stopped on a steep
slope.
When ACC detects no vehicle
in front within the set distance
NOTE
If the vehicle speed exceeds the set speed on
a down slope, the system will automatically
apply the brake to maintain the vehicle set
speed.
NOTE
When ACC detects a vehicle in
front within the set distance
BK0277700US.book 95 ページ ２０１９年３月８日 金曜日 午前９時２３分
Loading ...
Loading ...
Loading ...