Loading ...
Loading ...
Loading ...
Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped)
5-20 Features and controls
5
N00568001136
If you press the engine switch without press-
ing the brake pedal while the vehicle is sta-
tionary, you can change the operation mode
in the order of OFF, ACC, ON, OFF.
N00568101108
After approximately 30 minutes has elapsed
with the operation mode in ACC, the function
automatically cuts out the power for the audio
system and other electric devices that can be
operated with that mode.
When the engine switch is pressed while the
operation mode is in ACC, the power is sup-
plied again to those devices.
Changing the operation mode
CAUTION
When the engine is not running, put the oper-
ation mode in OFF. Leaving the operation
mode in ON or ACC for a long time when
the engine is not running may cause the bat-
tery to be discharged, making it impossible
to start the engine.
When the battery is disconnected, the current
operation mode is memorized. After recon-
necting the battery, the memorized mode is
selected automatically. Before disconnect-
ing the battery for repair or replacement,
make sure to put the operation mode in OFF.
Be careful if you are not sure which opera-
tion mode the vehicle is in when the battery
is run down.
The operation mode cannot be changed from
OFF to ACC or ON if the F.A.S.T.-key is not
detected to be in the vehicle. Refer to “Oper-
ating range for starting the engine and
changing the operation mode” on page 5-15.
When there is the F.A.S.T.-key in the vehicle
and the operation mode is not changed, the
battery in the F.A.S.T.-key may have worn
out.
Refer to “Warning activation” on page 5-21.
NOTE
If the operation mode cannot be changed to
OFF, perform the following procedure.
1. Move the selector lever to the “P”
(PARK) position, and then change the
operation mode to OFF.
2. One of the other causes could be low bat-
tery voltage. If this occurs, the keyless
entry system and the F.A.S.T.-key opera-
tion will also not operate. Contact an
authorized Mitsubishi Motors dealer or a
repair facility of your choice.
CAUTION
ACC power auto-cutout function
NOTE
It is possible to modify functions as follows:
• The time until the power cuts out can be
changed to approximately 60 minutes.
• The ACC power auto-cutout function can
be deactivated.
For details, we recommend you to consult an
authorized Mitsubishi Motors dealer.
On vehicles equipped with the Smartphone
Link Display Audio, screen operations can
be used to make the adjustment.
Refer to the separate owner’s manual for
details.
When the ACC power is automatically cut
out, you cannot lock and unlock the doors
using the keyless entry system or F.A.S.T.-
key operation.
BK0277700US.book 20 ページ ２０１９年３月８日 金曜日 午前９時２３分
Loading ...
Loading ...
Loading ...