OWNER'S MANUAL - Page 145

For 2020 ECLIPSE CROSS.

Loading ...
Loading ...
Loading ...
Continuously variable transmission (CVT)
5-64 Features and controls
5
In the main gate, selector lever has four posi-
tions, and is equipped with a lock button (D)
to avoid inadvertent selection of the wrong
gear.
N00547501024
When the selector lever cannot be shifted
from the “P” (PARK) position to another
position while the brake pedal is pressed and
held down with the ignition switch at the
“ON” position or the operation mode in ON,
the battery may be flat or the shift-lock mech-
anism may be malfunctioning.
Immediately have your vehicle checked by an
authorized Mitsubishi Motors dealer or a
repair facility of your choice.
If you need to move the vehicle, shift the
selector lever as follows.
1. Make sure the parking brake is firmly
applied.
2. Stop the engine if it is running.
The lock button must be pushed
while the brake pedal is depressed
to move the selector lever.
The lock button must be pushed to
move the selector lever.
The lock button need not be
pushed to move the selector lever.
WARNING
If the lock button is always pushed to
operate the selector lever, the lever may be
accidentally shifted into the “P” (PARK)
or “R” (REVERSE) position. Be sure not
to push the lock button when performing
the operations indicated by in the
illustration.
Always press the brake pedal when shift-
ing the selector lever into a selector posi-
tion from the “N” (NEUTRAL) position.
When beginning to drive, do not shift the
selector lever from the “N” (NEUTRAL)
position while pressing the accelerator
pedal. This will cause the vehicle to
“jump” forward or backward.
NOTE
To prevent mistakes in operating the lever,
make sure you stop briefly at each position.
After operating, check the position in the
multi-information display.
If the brake pedal is not depressed and held,
the shift-lock device activates to prevent the
selector lever from being moved from the
“P” (PARK) position.
For a shift indicated by in the illustra-
tion, depress the brake pedal before moving
the selector lever. If you attempt to move the
selector lever before depressing the brake
pedal, the selector lever may be immovable.
When the selector lever cannot
be shifted from the “P” (PARK)
position
NOTE
BK0277700US.book 64 ページ 2019年3月8日 金曜日 午前9時23分
Loading ...
Loading ...
Loading ...