Loading ...
Loading ...
Loading ...
Rear Cross Traffic Alert (RCTA) (if so equipped)
5-120 Features and controls
5
The detection area is shown as illustrated.
1. Select “ON” in the “BSW” setting screen
of the multi-information display.
(Refer to “Blind Spot Warning (BSW): To
operate” on page 5-114.)
2. When the selector lever is moved to the
“R” (REVERSE) position, the RCTA will
operate.
If the system detects a problem, a warning is
displayed on the information screen in the
multi-information display.
Detection areas
CAUTION
In certain situations, the RCTA may not
detect a vehicle in the detection areas. Some
of these situations include;
• When the reversing speed of your vehicle is
approximately 11 mph (18 km/h) or higher.
• When the speed of an approaching vehicle
is approximately 4 mph (7 km/h) or less.
• If the sensor detection area is blocked by a
nearby object, such as wall or parked vehi-
cle.
• When a vehicle is approaching from
straight behind your vehicle.
• When your vehicle is exiting from an
angled parking spot.
• Immediately after the RCTA has been
turned on.
• Immediately after the ignition switch is
turned to the “ON” position or the opera-
tion mode is put in ON.
• When the bumper surface around the sensor
is covered with dirt, snow and ice, etc.
• When the sensor becomes extremely hot or
cold, such as after the vehicle has been
parked for a prolonged time under the blaz-
ing sun or in cold weather.
CAUTION
If the bumper has experienced an impact, the
sensor may have been damaged and the
RCTA may not function properly. Have the
vehicle inspected at an authorized Mitsubishi
Motors dealer.
To operate
NOTE
Set the RCTA to OFF when towing.
The BSW light in the outside rearview mir-
ror may not be visible due to strong direct
sunlight or the glare from the headlights of
vehicles behind you during night driving.
When a problem is detected in
the system
CAUTION
BK0277700US.book 120 ページ ２０１９年３月８日 金曜日 午前９時２３分
Loading ...
Loading ...
Loading ...