Loading ...
Loading ...
Loading ...
Brake auto hold (if so equipped)
Features and controls 5-77
5
N00592000093
When the vehicle is stopped at traffic lights
etc., the vehicle can be held stationary with
the brake auto hold system even if you
release your foot from the brake pedal.
When the accelerator pedal is depressed, the
brakes are released.
If the brake auto hold switch is pressed while
all of the following conditions are met, the
system will change to the standby state and
the indicator light (A) on the switch comes
on.
The ignition switch or operation mode in
ON.
The driver’s seat belt is fastened.
The driver’s door is closed.
Brake auto hold (if so equipped)
WARNING
Do not overly rely on the brake auto hold
system. On steep slope, depress the brake
pedal firmly because the system may not
hold the vehicle stationary.
Never leave the vehicle while it is being
stopped by the brake auto hold system.
When leaving the vehicle, apply the park-
ing brake and move the selector lever to
the “P” (PARK) position.
Do not use brake auto hold system when
driving on slippery roads. The system may
not hold the vehicle stationary and could
result in an accident.
NOTE
While operating the brake auto hold system,
you may hear an operation noise to increase
braking force when the system detected the
movement of the vehicle. This does not indi-
cate a malfunction.
How to use brake auto hold
To turn on brake auto hold
NOTE
When the brake auto hold system cannot be
used, a buzzer will sound and the following
warning will appear on the information
screen in the multi-information display.
• If this warning appears, confirm that all of
the conditions for system operation are met
and that there is no malfunction in the sys-
tem.
• If this warning appears, fasten the driver’s
seat belt.
If any of the following occur while the sys-
tem is standby state, the brake auto hold sys-
tem will be turned off automatically and the
indicator light on the switch goes off.
A buzzer will sound and the message will
appear on the information screen in the
multi-information display.
• When the driver’s seat belt is unfastened.
• When the driver’s door is opened.
• When there is a malfunction in the system
NOTE
BK0277700US.book 77 ページ ２０１９年３月８日 金曜日 午前９時２３分
Loading ...
Loading ...
Loading ...