Loading ...
Loading ...
Loading ...
Seat belts
Seat and restraint systems 4-15
4
1. Occupants should always sit back in their
seats with their backs against the upright
seatback. To reduce the risk of serious
injury or death during deployment of the
airbag, adjust the driver’s seat as far back
as possible while maintaining a position
that still enables you to fully apply the
pedals, easily control the steering wheel,
and safely operate the vehicle. The front
passenger seat should also be moved as
far back as possible. Refer to “Supple-
mental Restraint System (SRS) - airbag”
on page 4-30. Also refer to “To adjust the
seat forward or backward” on page 4-4.
2. Before using the rear center seat belt,
make sure that the detachable anchor is
securely latched and the seat belt is not
twisted. For details, refer to page 4-17.
3. Grasp the latch plate and slide it up the
webbing so that it easily pulls across your
body.
4. Pull the seat belt out slowly while holding
the latch plate. Push the latch plate into
the buckle until you hear a “click”. Pull
up on the belt to be sure the latch plate is
locked securely in the buckle.
WARNING
To reduce the risk of serious injury or
death in the event of an accident or sud-
den stop, all seatbacks should be kept in
the upright position while the vehicle is in
motion.
Seat belt performance during an accident
can be adversely affected if the seatbacks
are reclined. The more a seatback is
reclined, the more likely seat belt perfor-
mance will be adversely affected. If the
seat belt is not properly positioned against
the body during an accident, there is
increased risk you will slide under the belt
and receive serious injury or death.
BK0277700US.book 15 ページ ２０１９年３月８日 金曜日 午前９時２３分
Loading ...
Loading ...
Loading ...