Loading ...
Loading ...
Loading ...
HomeLink® Wireless Control System (if so equipped)
5-212 Features and controls
5
Accessories can be operated when the igni-
tion switch or the operation mode is in ON or
ACC.
Accessories can be operated in all ignition
switch positions or all operation modes.
N00554301066
HomeLink
®
Wireless Control System is a
registered trademark of Gentex Corporation.
HomeLink
®
provides a convenient way to
replace up to 3 hand-held radio-frequency
(RF) transmitters used to activate devices
such as gate operators, garage door openers,
entry door locks, security systems, even home
lighting. Additional HomeLink
®
information
can be found at www.homelink.com,
www.youtube.com/HomeLinkGentex, or by
calling the toll-free HomeLink
®
-Hotline at 1-
800-355-3515.
Type 1
Center console
Type 2
HomeLink
®
Wireless Con-
trol System
(if so equipped)
Floor console
WARNING
Do not use HomeLink
®
with any garage
door opener that lacks safety stop and
reverse features as required by U.S. Fed-
eral Regulations. A garage door opener
which cannot detect an object in the path
of a closing garage door and then auto-
matically stop and reverse, does not meet
current U.S. Federal Regulations. Using a
garage door opener without these features
increases the risk of serious injury or
death.
During programming, your garage door
or gate may open or close. Make sure that
people and objects are clear of the garage
door or gate that you are programming.
NOTE
Once HomeLink
®
is programmed, retain the
original transmitter for future programming
procedures (for example, new vehicle pur-
chases). Upon sale of the vehicle, the pro-
grammed HomeLink
®
buttons should be
erased for security purposes. Refer to “Clear-
ing the programmed information” on page
5-216.
BK0277700US.book 212 ページ ２０１９年３月８日 金曜日 午前９時２３分
Loading ...
Loading ...
Loading ...