Loading ...
Loading ...
Loading ...
Adaptive Cruise Control System (ACC) (if so equipped)
5-102 Features and controls
5
RESUME” will appear on the meter. To start
moving again, push up the “RES +” switch or
depress the accelerator pedal.
N00581900047
Every time you press the ACC following dis-
tance setting switch, the set following dis-
tance changes in order. Even after turning off
the ACC system or putting the operation
mode in OFF, the system retains your last
selected following distance setting in mem-
ory.
The following distance indicator shows the
level of the following distance:
N00582000045
Press and hold the ACC ON/OFF switch
while the operation mode is in the ON posi-
tion. A buzzer will sound and the multi-infor-
mation display will show the following
indicator.
The conventional cruise control is turned off
when the ignition switch or the operation
mode is turned off.
NOTE
When any of the following conditions are
present, the ACC control cannot be resumed.
• When your vehicle speed is more than
110 mph (180 km/h).
• When your vehicle is driven at speeds
between approximately 0 to 20 mph (0 to
30 km/h) and the ACC is not detecting a
vehicle in front.
• When ASC is in the OFF position.
• While ABS, ASC or TCL is activated.
• When the selector lever is in positions other
than “D” (DRIVE).
• While the brake pedal is depressed.
• While the parking brake is applied.
• When the ACC system has judged that the
performance for detecting a front vehicle is
degraded.
• When an abnormality in the ACC system
has been detected.
• While the brake pedal is depressed, the
vehicle will not start moving again even if
the driver operates the switches.
To change the following dis-
tance
NOTE
Actual distance will vary depending on your
vehicle speed and the front vehicle speed.
The distance will become longer when the
vehicle speeds are higher.
To activate conventional cruise
control
Long
Short
BK0277700US.book 102 ページ ２０１９年３月８日 金曜日 午前９時２３分
Loading ...
Loading ...
Loading ...