Loading ...
Loading ...
Loading ...
Adaptive Cruise Control System (ACC) (if so equipped)
Features and controls 5-99
5
N00581600057
There are two ways to decrease the set speed.
The set speed will decrease by 1 mph
(1.6 km/h) every time you push down the
“SET -” switch while the ACC is activated. If
you hold the switch pushed down, the set
speed decreases in 5 mph (8 km/h) incre-
ments.
By depressing the brake pedal while the ACC
is activated, the ACC control is canceled and
your vehicle speed will decrease.
At the point where the vehicle speed reaches
your desired speed, push down and release
the “SET -” switch; the new speed is then set
in the system.
N00582800030
Simply depress the accelerator pedal to tem-
porarily accelerate the vehicle. Releasing the
pedal to restart the ACC control.
To decrease the set speed
By using the “SET -” switch:
NOTE
There is some time lag until the vehicle
begins decelerating after the set speed has
been changed.
The set speed can be changed even while
your vehicle is following a vehicle in front
using the ACC. In this case, however,
although the set speed itself is decreased,
your vehicle will not decelerate.
While the ACC system is in the stationary
vehicle hold state, the vehicle speed cannot
be set.
By using the brake pedal:
NOTE
NOTE
The ACC control will not resume after
releasing the brake pedal.
To temporarily accelerate the
vehicle
WARNING
The ACC braking control and approach
alarm functions will not work while the
accelerator pedal is depressed.
BK0277700US.book 99 ページ ２０１９年３月８日 金曜日 午前９時２３分
Loading ...
Loading ...
Loading ...