Loading ...
Loading ...
Loading ...
Wiper and washer switch
5-202 Features and controls
5
The windshield wiper and washer can be
operated with the ignition switch or the oper-
ation mode is in ON or ACC.
If the blades are frozen to the windshield, do
not operate the wipers until the ice has melted
and the blades are freed, otherwise the wiper
motor may be damaged.
With the lever in the “INT” (speed sensitive
intermittent operation) position, the intermit-
tent intervals can be adjusted by turning the
knob (A).
Windshield wipers
NOTE
To ensure a clear rearward view, the rear
window wiper will automatically perform
several continuous operations if the selector
lever is put in the “R” (REVERSE) position
while the windshield wipers are operating.
Refer to “Rear window wiper and washer”
on page 5-206.
Except for vehicle with rain sensor
MIST- Misting function
The wipers will operate once.
OFF- Off
INT- Intermittent (Speed sensitive)
LO- Slow
HI- Fast
To adjust intermittent intervals
1- Fast
2- Slow
NOTE
The speed-sensitive-operation function of
the windshield wipers can be deactivated.
For further information, please contact your
authorized Mitsubishi Motors dealer or a
repair facility of your choice. On vehicles
equipped with Smartphone Link Display
Audio, screen operations can be used to
make the adjustment.
Refer to separate owner’s manual for details.
BK0277700US.book 202 ページ ２０１９年３月８日 金曜日 午前９時２３分
Loading ...
Loading ...
Loading ...