Loading ...
Loading ...
Loading ...
Brake auto hold (if so equipped)
5-78 Features and controls
5
When the vehicle is stopped by depressing
the brake pedal with the selector lever in any
position other than “P” (PARK) or “R”
(REVERSE), the brake auto hold activates
and the vehicle will be held stationary.
The brake auto hold indicator light in the
instrument cluster will come on while the
system activates.
If keeping pressing the brake auto hold
switch after setting the brake auto hold to
ON (stand by), the brake auto hold will
return to OFF as a protection function is
operated.
After returning to OFF, the brake auto hold
will not be switched to ON (Stand by) even if
the brake auto hold switch is pressed. To set
the brake auto hold to ON, restart the engine
and press the brake auto hold switch again.
To activate brake auto hold
NOTE
or
CAUTION
Release the brake pedal only after the brake
auto hold indicator light has illuminated.
NOTE
In the following situations, the brake auto
hold system may not operate temporarily.
• The vehicle is stopped on a slippery road.
• The vehicle was stopped while the steering
wheel was turned all the way to the left or
right.
• The vehicle is being turned on a parking lot
turntable.
If this occurs, the brake auto hold system
will return to the normal operation if you
depress the accelerator pedal and the vehi-
cle starts moving again.
If the following operation is performed, the
brake auto hold will be deactivated and the
brake auto hold indicator light in the instru-
ment cluster goes off.
• When shifting the selector lever to the “P”
(PARK) or “R” (REVERSE) position with
depressing the brake pedal.
• When the Electric parking brake is applied
by using the Electric parking brake switch.
While the vehicle is held stationary with the
brake auto hold system, the Electric parking
brake will be automatically applied under the
following conditions, and a buzzer will
sound and the message will appear on the
information screen in the multi-information
display.
• After approximately 10 minutes has elapsed
with applying the brake auto hold system.
• When the driver’s seat belt is unfastened.
• When the driver’s door is opened.
• When the ignition switch is turned to the
“OFF” position or the operation mode is
put in OFF.
• When the system detects the vehicle mov-
ing down a slope.
If the Electric parking brake cannot be
applied automatically due to the system mal-
function, the message will appear on the
information screen in the multi-information
display. Depress the brake pedal.
NOTE
BK0277700US.book 78 ページ ２０１９年３月８日 金曜日 午前９時２３分
Loading ...
Loading ...
Loading ...