Loading ...
Loading ...
Loading ...
Parking brake
Features and controls 5-49
5
Press the switch in direction (7) to fully open
the rear shade automatically.
To stop the shade before it is fully open, press
the switch in direction (7) or (8).
Press the switch in direction (8) to fully close
the rear shade automatically.
To stop the shade before it is fully closed,
press the switch in direction (7) or (8).
If a person’s hand, neck, etc., is trapped in the
rear shade, the shade will automatically open
a maximum of 8 inches (20 cm) as a safety
function. After the rear shade opens, you can
use the switch to close it.
If the safety mechanism operates five times or
more consecutively, you will not be able to
close the rear shade normally.
If this occurs, perform the following proce-
dure to reset the safety mechanism.
1. Press and hold the switch in direction (8).
2. The rear shade will move to the fully
closed position in small increments.
3. When the rear shade has stopped in the
fully closed position, release the switch.
(The resetting procedure is finished.)
If the rear shade does not move correctly to
the fully closed positions after you perform
the resetting procedure, contact an authorized
Mitsubishi Motors dealer.
N00511401527
To park the vehicle, first bring it to a com-
plete stop, firmly apply the parking brake,
and then move the selector lever to the “P”
(PARK) position.
Make sure the brake warning light is illumi-
nated.
7- Open (rear shade)
8- Close (rear shade)
Opening the rear shade
Closing the rear shade
Safety mechanism
CAUTION
The safety mechanism is cancelled just
before the rear shade is fully closed. This
allows the rear shade to close completely.
Therefore be especially careful that no fin-
gers are trapped in the rear shade.
NOTE
The safety mechanism can be activated if the
driving conditions or other circumstances
cause the rear shade to be subjected to a
physical shock similar to that caused by a
trapped hand or head.
Do not release the switch until the resetting
procedure is finished. If you release the
switch, the resetting mode will be cancelled.
To perform the resetting procedure again,
repeat the procedure from step 1.
Parking brake
BK0277700US.book 49 ページ ２０１９年３月８日 金曜日 午前９時２３分
Loading ...
Loading ...
Loading ...