Loading ...
Loading ...
Loading ...
Head restraints
Seat and restraint systems 4-11
4
Press the lock knob (A) in the direction
shown by the arrows. Then pull the head
restraint up and out of the seatback.
First check that the head restraint stalk with
the notches (B) is positioned toward the hole
with the lock knob (A), and then insert the
head restraint into the seatback.
And then insert it into the seatback. Push the
head restraint down while pressing the lock
knob (A) until the restraint locks into place.
To remove
WARNING
To help minimize the risk of neck injury in
the event of an accident, the head
restraints must be properly installed and
positioned to proper height before vehicle
operation.
WARNING
When a person sits in the rear seating
position, pull up the head restraint to a
height at which it locks in position. Be
sure to make this adjustment before start-
ing to drive. Serious injuries could other-
wise be suffered in the result of an impact.
NOTE
If a front seat head restraint contacts the
headliner and cannot be removed, tilt the
seatback rearward slightly.
Refer to “To adjust the seatbacks” on page
4-5.
To remove the head restraint from the left or
right rear seat, tilt the seatback forward
slightly.
Refer to “Rear seats” on page 4-6.
To install
NOTE
Before installing the head restraint to the left
or right rear seat, tilt the seatback forward
slightly.
Refer to “Rear seats” on page 4-6.
BK0277700US.book 11 ページ ２０１９年３月８日 金曜日 午前９時２３分
Loading ...
Loading ...
Loading ...